Panasonic WV-CS954 operating instructions Shortcuts, Controller Operation Setting

SHORTCUTS

Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts, you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM FUNCTION button.

The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the camera to a preset position by inputting the applicable position number on the 10-key pad.

Notes:

•Turn off digital flip before registering preset positions. If NO REGS.; FLIP ON appears, do the setting again.

•Shortcuts may not be performed if they are executed while a pan, tilt, zoom, or focus operation is in progress.

•Shortcuts 1 through 64, 169, 170, and 301~556 can be saved as part of a patrol routine.

•Except for shortcuts 169 and 170, executing any shortcut during patrol routine PLAY will cause the PLAY operation to stop.

	Controller Operation	Setting
[6]	+ [5] + [CAM FUNCTION]	AUTO PAN ON
[6]	+ [6] + [CAM FUNCTION]	AUTO PAN OFF
[6]	+ [7] + [CAM FUNCTION]	Increases AUTO PAN speed one step.
[6]	+ [8] + [CAM FUNCTION]	Decreases AUTO PAN speed one step.
[6]	+ [9] + [CAM FUNCTION]	Sets AUTO PAN start point.
[7]	+ [0] + [CAM FUNCTION]	Sets AUTO PAN end point.
[7]	+ [1] + [CAM FUNCTION]	AUTO MODE: OFF
[7]	+ [2] + [CAM FUNCTION]	AUTO MODE SEQ: OFF
[7]	+ [3] + [CAM FUNCTION]	AUTO MODE SEQ: SORT ON
[7]	+ [4] + [CAM FUNCTION]	Reverses AUTO PAN range.
[7]	+ [6] + [CAM FUNCTION]	ENDLESS: ON
[7]	+ [7] + [CAM FUNCTION]	ENDLESS: OFF
[7]	+ [8] + [CAM FUNCTION]	DIGITAL FLIP: ON
[7]	+ [9] + [CAM FUNCTION]	DIGITAL FLIP: OFF
[8]	+ [0] + [CAM FUNCTION]	PROPO.P/T: ON
[8]	+ [1] + [CAM FUNCTION]	PROPO.P/T: OFF
[8]	+ [4] + [CAM FUNCTION]	SUPER-D 3: ON
[8]	+ [5] + [CAM FUNCTION]	SUPER-D 3: OFF
[8]	+ [6] + [CAM FUNCTION]	AF MODE: AUTO
[8]	+ [7] + [CAM FUNCTION]	AF MODE: MANUAL
[8]	+ [8] + [CAM FUNCTION]	Performs auto focus.
[8]	+ [9] + [CAM FUNCTION]	Moves to home position.
[9]	+ [0] + [CAM FUNCTION]	BW: ON
[9]	+ [1] + [CAM FUNCTION]	BW: OFF
[9]	+ [2] + [CAM FUNCTION]	BW: AUTO
[9]	+ [3] + [CAM FUNCTION]	CAMERA ID: ON
[9]	+ [4] + [CAM FUNCTION]	CAMERA ID: OFF
[9]	+ [5] + [CAM FUNCTION]	AREA TITLE: ON (NESW)
[9]	+ [6] + [CAM FUNCTION]	AREA TITLE: ON (USER)
[9]	+ [7] + [CAM FUNCTION]	AREA TITLE: OFF
[1]	+ [0] + [0] + [CAM FUNCTION]	Adjusts camera position (REFRESH)
[1]	+ [0] + [1] + [CAM FUNCTION]	Stores preset to first available preset number (1 to 64).
[1]	+ [6] + [4] + [CAM FUNCTION]
[1]	+ [6] + [5] + [CAM FUNCTION]	PATROL1: PLAY
[1]	+ [6] + [6] + [CAM FUNCTION]	PATROL 1 - PATROL 4: STOP
[1]	+ [6] + [7] + [CAM FUNCTION]	PATROL1: LEARN start
[1]	+ [6] + [9] + [CAM FUNCTION]	IRIS: OPEN

-44-