Setting the clock
The clock has a
For example, setting it to 10:08
1 Press (OFF) or (DSPL) during operation.
2 Press (DSPL) for two seconds.
100
The hour digit flashes.
1Set the hour digits.
To go forward
To go backward
1000
2Press (SEL) momentarily.
1000
The minutes digits flashes.
3Set the minute digits.
To go forward
To go backward
1008
3 Press (DSPL) momentarily.
1008
The clock starts.
Note
If the POWER SELECT switch on the top of the unit is set to the B position, the clock cannot be set unless the power is turned on. Set the clock after you have turned on the radio.
Cassette Player
Listening to a tape
Insert a cassette.
Playback will start automatically.
If a cassette is already inserted, press (SOURCE) repeatedly until “TAPE” is displayed.
TAPE
The side facing up is being played.
TAPE
The side facing down is being played.
Tip
To change the tape transport direction, press (MODE) (*) during tape playback.
To | Press |
Stop playback | (OFF) |
Eject the cassette | 6 |
Fast-winding the tape
During playback, press either side of (SEEK/AMS) for two seconds.
SEEK
AMS
Rewind
To start playback during
EN
Getting Started/Cassette Player
5