O W N E R ’ S M A N U A L
note that this profile allows you to separately adjust the peaks and the basic level of effort.
P5 Power Interval
| 225 |
| 200 |
| 175 |
Watt | 150 |
125 | |
100 | |
| 75 |
| 50 |
25
0
Duration
PROFILE P6.
P6 Fatburner 1
| 180 |
| 160 |
| 140 |
BPM | 120 |
100 | |
80 | |
| 60 |
| 40 |
20
0
Duration
PROFILE P7. Uphill heart rate profile where the heart rate increases steadily until the midpoint of the profile, steadily decreasing thereafter. This profile is suitable for beginners. With default setting, max. HR value is 150, average HR is 121.
P7 Fatburner 2
| 180 |
| 160 |
| 140 |
BPM | 120 |
100 | |
80 | |
| 60 |
40
20
0
Duration
PROFILE P8.
P8 Cardio Strength
| 180 |
| 160 |
| 140 |
BPM | 120 |
100 | |
80 | |
| 60 |
| 40 |
20
0
Duration
PROFILE P9. Uphill heart rate profile for the improvement of endurance fitness. Peaks are relatively longlasting, increasing in intensity until the closing
phase of the profile. This profile is specifically suitable for the physically fit. With default setting, max. HR value is 170, average HR is 131.
P9 Cardio Climb
| 180 |
| 160 |
| 140 |
BPM | 120 |
100 | |
80 | |
| 60 |
40
20
0
Duration
PROFILE P10.
P10 Cardio Interval
| 180 |
| 160 |
| 140 |
BPM | 120 |
100 | |
80 | |
| 60 |
| 40 |
20
0
Duration
T-RIDE
1.Select
2.Select the terrain and confirm your selection.
3.Set the starting point for the session using the selection dial.
4.Set the ending point for the session using the selection dial.
5.Start your training session by pedalling. You can change gears
6.Once you have completed the route, the meter beeps and the training session ends.
7.To stop the training session, press the BACK/STOP button. You can then stop the session by selecting EXIT, save the session to the memory by selecting SAVE AND EXIT or continue your training session by selecting
CONTINUE.
OWN TRAINING
You can create and save up to 100 training programs on the meter.
SAVING A PROGRAM
1.End your training session by pressing BACK/STOP.
2.Select SAVE AND EXIT and confirm your selection.
3.Enter a name for the training session and confirm it
using the selection dial.
10