partner. Whatever your goal in training, we are certain this is the training equipment to get you there. You'll find information about using your exercise equipment and what makes for efficient training at Tunturi's website at www.tunturi.com.
A S S E M B LY
Before assembling the device, insure all parts are present:
1. Frame
2. Handlebars (2)
3. Horizontal handlebar
4. Meter
5.Power cord
6. Assembly kit (contents are marked with an * in the spare part list): keep the assembly tools, as you may need them e.g. for adjusting the equipment
In case of problems contact your Tunturi dealer. The directions left, right, front and back are defined as seen from the exercising position. To avoid injury, you must fold up the deck prior to lifting the treadmill out of the box.
HANDRAILS
Connect the wires before you assemble the handrails. Secure each handrail with four washers and bolts. NOTE: Do not tighten these bolts until the horizontal handlebar and monitor have been secured.
HORIZONTAL HANDLEBAR
The horizontal handlebar (rod) is tapered on one side. Insert the tapered end of the rod into the
O W N E R ' S M A N U A L • T 5 0
right handrail before fitting the rod into the left side. NOTE: the left side is secured with the long bolt while the right ride is secured with the short bolt. Do not tighten these bolts until the monitor has been secured.
MONITOR
Connect the wire. After connecting the wire thread it into the handlebar then push the monitor onto the handrails. You may have to shake the handrails from side to side to get the monitor to fit. Once you have the monitor in place, secure and tighten the bolts on the monitor. Tighten all bolts. Remove the protective film from the display.
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the treadmill at the left front corner. Before connecting the device to a power source, make sure that local voltage matches that indicated on the type plate. The treadmill operates at 230 V or 120 V. Turn on the power using the switch next to the socket on the treadmill. This treadmill must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an
a risk of electric shock. Check with a qualified electrician or serviceman, if you are in doubt as to
G B
3