IMPORTANT INFORMATION
Caring for Your V800 | 93 |
V800 | 93 |
Heart rate sensor | 93 |
Stride Sensor Bluetooth® Smart, Speed Sensor Bluetooth® Smart and Cadence Sensor Bluetooth® |
|
Smart | 94 |
Storing | 94 |
Service | 94 |
Technical Specification | 95 |
V800 | 95 |
H7 Heart Rate Sensor | 96 |
Polar FlowSync Software and USB Cable | 96 |
Polar Flow Mobile Application Compatibility | 97 |
Water Resistance | 97 |
Batteries | 97 |
Changing Heart Rate Sensor Battery | 98 |
Precautions | 99 |
Interference During Training | 99 |
Minimizing Risks When Training | 99 |
Limited International Polar Guarantee | 100 |
Compliance Statement | 102 |
Disclaimer | 103 |
CARING FOR YOUR V800
Like any electronic device, Polar V800 should be treated with care. The suggestions below will help you fulfill guarantee obligations and enjoy this product for many years to come.
V800
Keep your training device clean. Use a damp paper towel to wipe dirt from the training device. To maintain the water resistance, do not wash the training device with a pressure washer. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals.
After each time of using the USB port of the training device, check visually that there is no hair, dust or other dirt on the connector. Gently wipe to remove any dirt from the connector pins by using a dry cleaning cloth (like one used to clean glass surfaces). A toothpick can be used to remove hair, dust or other dirt from the connector cavity. Rinse the USB connector with lukewarm water after each session.
The combined impact of moisture and intense abrasion may cause a darker color to come off clothing possibly staining the
Operating temperatures are
HEART RATE SENSOR
Connector: Detach the connector from the strap after every use and dry the connector with a soft towel. Clean the connector with a mild soap and water solution when needed. Never use alcohol or any abrasive
93