material (e.g. steel wool or cleaning chemicals).
Strap: Rinse the strap under running water after every use and hang to dry. Clean the strap gently with a mild soap and water solution when needed. Do not use moisturizing soaps, because they can leave residue on the strap. Do not soak, iron, dry clean or bleach the strap. Do not stretch the strap or bend the electrode areas sharply.
Check the washing instructions on the label of the strap.
STRIDE SENSOR BLUETOOTH® SMART, SPEED SENSOR BLUETOOTH® SMART AND CADENCE SENSOR BLUETOOTH® SMART
Clean the sensors with a mild soap and water solution and rinse them with clean water. To maintain the water resistance, do not wash the sensors with a pressure washer. Do not immerse the speed sensor, cadence sensor or stride sensor in water. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals. Avoid hard hits to the sensors, as these may damage the sensor units.
STORING
Keep your training device and sensors in a cool and dry place. Do not keep them in a damp environment, in
It is recommended to store the training device partially or fully charged. The battery slowly loses its charge when it is stored. If you are going to store the training device for several months, it is recommended to recharge it after a few months. This will prolong the battery lifetime.
Dry and store the strap and the connector separately to maximize the heart rate sensor battery lifetime. Keep the heart rate sensor in a cool and dry place. To prevent snap oxidation, do not store the heart rate sensor wet in
SERVICE
During the
For contact information and all Polar Service Center addresses, visit www.polar.com/support and country- specific websites.
Register your Polar product at http://register.polar.fi/ to ensure we can keep improving our products and services to better meet your needs.
94