Selecting a U.S. Standard or Metric Display
The treadmill can display measurements in either Metric or U.S. Standard. The default factory setting is set to display U.S. Standard. To change this setting, perform the following steps:
4.At the SELECT UNITS prompt, press OK. Use the navigational arrow keys to select a unit of measure (U.S. or METRIC).
5.When you are ready, press OK to accept the display setting and move to the next program. Or, press PAUSE/ RESET to return to the banner.
Setting a Pause Time Limit
You can limit how long a user can pause while exercising on the unit by entering a time between 1 and 10 minutes. For example, if you set the pause time limit to 1 M, the display automatically resets to the banner if no key press occurs within one minute.
6.At the SET MAX PAUSE TIME prompt, press OK. Use the navigational arrow keys to change the time limit. Choose between 1 and 10 minutes.
7.When you are ready, press OK to accept the displayed setting and move to the next program. Or, press PAUSE/ RESET to return to the banner.
Owner’s Manual: Advanced Programming and Troubleshooting | 51 |