Precor 9.33, 9.31 manual Viewing the Hour Meter, Viewing the Software Part Numbers

Viewing the Hour Meter

HOUR METER scrolls across on the display.

4.Press OK to view the number of hours that the unit has been in use or press the ▼ arrow key to move to the next informational display.

The treadmill tracks the elapsed minutes, but the value that appears is truncated to the nearest full hour.

5.When you are ready, press OK to move to the next display (software version).

Viewing the Software Part Numbers

U-BOOT SW scrolls across the display.

6.Press OK to view the upper board boot software part number (for example, 48996-100) or press the ▼ arrow key to move to the next informational display.

7.When you are ready, press OK to move to the next display (upper base application software part number).

U-BASE SW scrolls across the display.

8.Press OK to view the upper base application software part number or press the ▼ arrow key to move to the next informational display.

9.When you are ready, press OK to move to the next display (lower board’s serial number).

LOWER SW scrolls across the display.

10.Press OK to view the lower board software version and part number.

11.Write the numbers below. You will need these numbers if you call Customer Support with questions. This information will help rule out any software-related problems:

UPPER BOOT SW: ___________________

UPPER BASE SW: ___________________

LOWER SW: ___________________

12.When you are ready, press OK to move to the next display (serial number).

Owner’s Manual: Advanced Programming and Troubleshooting 54