Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly instructions. If you do not assemble the treadmill according to these guidelines, you could void the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the treadmill except for minor belt adjustments and maintenance as described in the owner’s manual. Should you need more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor website at www.precor.com/cons.
Unpacking the Equipment
The treadmill is carefully tested and inspected before shipment. The unit is shipped in one box. Ask for help from two or more people to unpack and assemble the treadmill. If any items are missing, contact your dealer.
Required Tools
•
•Crescent wrench
•Bubble level
•Wire cutter
Installation Requirements
Follow these installation requirements when assembling the unit:
•Assemble the unit near the location where you plan to use it.
•Provide ample space around the unit.
Open space around the unit allows for easier access.
•Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions.
•Open the box and assemble the components in the sequence presented in this guide.
•Obtain assistance.
Ask another capable adult for assistance during the assembly process.
•Use your fingers or the appropriate tools to insert fasteners. Proper alignment helps alleviate crossthreading. Do not fully wrench tighten fasteners until instructed to do so.
Important: When wrench tightening, the head of the fastener should be flush with the product. If it is not,
•If you plan to move the unit, obtain help and use proper lifting techniques.
Grasp the
9.3x | 1 |