S a f e t y G u i d e l i n e s
Successful resistance training programs have one prominent feature in common...safety. Resistance training has some inherent dangers, as do all physical activities. The chance of injury can be greatly reduced or completely removed by using correct lifting techniques, proper breathing, maintaining equipment in good working condition, and by wearing the appropriate clothing.
1.It is highly recommended that you consult your physician before beginning any exercise program. This is especially important for individuals over the age of 35, or persons with
2.Always warm up before starting a workout. Try to do a total body warm up before you start. It is especially important to warm up the specific muscle groups you are going to be using. This can be as simple as performing a warm up set of high repetitions and light weight for each exercise.
3.Use proper form. Focus on only working the muscle groups intended for the exercise you are doing. If there is strain elsewhere, you may need to
4.Breath properly. Inhale during the eccentric phase of the exercise, and exhale during the lifting, or concentric phase. Never hold your breath during any part of an exercise.
5.Always wear the appropriate clothing and shoes when exercising. Wearing comfortable athletic shoes with good support and suitable,loose fitting,breathablebreathableclothingclothingwill willreducereduceth riskthe riskof injuryof injury. .
6.Maintaining equipment in proper operating condition is of utmost importance for a safe resistance training program. Pulleys and cables should be checked for wear frequently and replaced as needed. Equipment should be lubricated as indicated by the manufacturer.
7.Read and study all warning labels on this machine. It is absolutely necessary that you familiarize yourself and all others with the proper operation of this machine prior to use.
8.Keep hands, limbs, loose clothing and long hair well out of the way of all moving parts.
9.Do not attempt to lift more weight than you can control safely.
10.Inspect the machine daily for loose or worn parts. If a problem is found do not allow the machine to be used until all parts are tightened or worn or defective parts are repaired or replaced.
7