Alliance Laundry Systems PHM1263R manual Programming Control

				Programming Control
		Table 1 (continued)
Option	Option	Description	Default	Value Range
Number	Display		Value
11	“Codn”	Cooldown Enable/Temperature	“oFF”	“oFF” or 50°F-160°F/10°C-71°C
12	“PtEn”	Production Test Cycle (On/Off)	“on”	“on”/“oFF”
13	“rAEn”	Manual Rapid Advance (On/Off)	“on”	“on”/“oFF”
14	“nCtd”	No Cycle Time Display	“oFF”	“on”/“oFF”
15	“PCtd”***	Programmable Cycle Time Display	0	0 = Disabled / 1 = Enabled
16	“SdAd”	Slow Drain Detection Adjust	0	0-255 seconds
17	“rtC-”	Real Time Clock	—	—
a.	“rtC1”	Set Real Time Clock Minutes	—	00-59
b.	“rtC2”	Set Real Time Clock Hours	—	00-23
c.	“rtC3”	Set Real Time Clock Day	—	“001” (Sunday)-“007” (Saturday)
d.	“rtC4”	Set Real Time Clock Date	—	1-31
e.	“rtC5”	Set Real Time Clock Month	—	1-12
f.	“rtC6”	Set Real Time Clock Year	—	00 (2000)-99
g.	“rtC7”	Daylight Savings Option	“on”	“on”/“oFF”
18	“dAEn”	Manual Diagnostics (On/Off)	“on”	“on”/“oFF”
19	“FLo”	Low Water Level	3	1-10
20	“FnEd”	Medium Water Level	15	11-20
21	“FHI”	High Water Level	27	21-30
22	“tCF”	Temperature Controlled Fill	“oFF”	“on”/“oFF”
23	“ALd”	Auto-Water Leak Detection	—	—
a.	“ALd1”	Auto-Water Leak Detection (On/Off and cycles)	“oFF”	“oFF”/0-127 (Cycles)
b.	“ALd2”	Auto-Water Leak Detection Hour	0	0-23
c.	“ALd3”	Auto-Water Leak Detection Day of Week	”127”*	“0”-“127”*

*Refer to programming section for value definition.

**Refer to the Operation Manual for default cycle setting information.

***Option not available on Software Version 1.

Table 1

F8208801 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 13