Alliance Laundry Systems PHM1263R manual Special Features

Special Features

Programming Control

The control allows the washer-extractor owner to program the control with the use of the keypad. Cycle options may be programmed, audit information may be viewed and diagnostic tests may be run by pressing combinations of the select cycle keypads.

For details on programming select cycle options, refer to Programming Control.

Collecting Audit Information

The control will store audit information in its memory that can be retrieved by pressing various combinations of Select Cycle keypads. The control will record total machine cycles.

For more information on the audit features, refer to Collecting Audit Information.

NOTE: Additional audit information is retrievable with an external device, using infra-red communications. Refer to the appropriate instruction manual.

Testing Machine and Control Functions

Special diagnostic features built into the control allow the owner to run specific diagnostic tests. By opening and closing the access panel and then pressing various sequences of Select Cycle keypads, the owner may retrieve or perform the following tests:

•Front End Control Software Version Number

•Output Board Control Software Version Number

•Output Board Water Level Sensor Trim Value

•Access Panel Opening Test

•Door Switch Input Test

•Door Lock Input Test

•Show Fill Time Test

•Show Drain Time Test

•Temperature Sensor Display Test

•Start Pulse Test

•VFD Balance Input Test

•24 VAC Switch Input Test

•VFD Drive Fault Input Test

•Frame Balance Switch Input Test

•VFD Balance Weight Test

•Water Purge Test

•Water Leak Detection test

For detailed information on running diagnostic tests, refer to Testing Machine and Control Functions.

Rapid Advance Feature

This feature allows the user to quickly advance through active cycles. This feature is useful when tests must be performed immediately on a washer-extractor currently in an active cycle. In this case, the user can quickly advance through the cycles to shakeout. At this point, the user can perform the required tests and then return the washer-extractor to the point it was interrupted.

For detailed information on using the Rapid Advance feature, refer to Rapid Advance Feature.

Communications Mode

This feature allows the control to communicate with an external device using infra-red communications. This allows the control to be programmed and have its data read without using the keypad.

For more detailed information on using the Communications Mode feature, refer to Communications Mode.

F8208801 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9