Alliance Laundry Systems PHM1263R manual Display Identification, Four 7-Segment Digits

Display Identification

Light Emitting Diodes (LEDs) (Refer to Figure 1)

LIGHT EMITTING DIODES (LEDs) are used to indicate the chosen cycle, cycle status, when the bleach compartment is dispensing, and door lock information. See below for information on each LED.

WASH LED

WASH LED is lit at the beginning of a wash portion of the cycle and will remain lit until the wash is complete.

RINSE LED

RINSE LED is lit at the beginning of a rinse portion of the cycle and will remain lit until the rinse is complete.

SPIN LED

SPIN LED is lit during the Final Spin portion of the cycle.

DOOR LED

DOOR LED is lit whenever the door is locked.

Four 7-Segment Digits

The 7-SEGMENT DIGITS are used to display the time remaining in a cycle, error messages and descriptive codes. During diagnostic testing or manual programming of the control, these digits will display descriptive codes and values (as described in Entering the Manual Mode).

F8208801 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7