Alliance Laundry Systems PHM1263R manual Temperature Controlled Fill Enable/Disable tCF

Programming Control

22.Temperature Controlled Fill Enable/Disable “tCF”

This option allows the owner to enable or disable a Temperature Controlled Fill. When enabled, the control will regulate the temperature of the fill to the temperature programmed in options 8, 9 and 10.

How to Program Temperature Controlled Fill

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the #3 (>) or the #6 (<) keypad until

“Prog” appears in the display. Press the START (enter) keypad and “dCYC” will appear in the display.

3.Press the #3 (>) or the #6 (<) keypad to scroll through the programmable options until “tCF” appears in the display.

4.When “tCF” appears in the display, press the START (enter) keypad. A number will appear in the display. This number (found below) corresponds to the current Temperature Controlled Fill status.

“on” = Temperature Controlled Fill Enabled “oFF” = Temperature Controlled Fill Disabled

5.Press the #3 (>) or the #6 (<) keypad to change the current status.

6.Press the START (enter) keypad when the desired status appears in the display. The next option, “ALd”, will appear on the display.

NOTE: To program “ALd” (Auto-Water Leak Detection), refer to option 23. To program other options, refer to the appropriate section.

How to Exit Programming Feature

Press the #5 (<) keypad until the control returns to Start Mode.

40 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208801