Alliance Laundry Systems PHM1263R manual Contents

Table of	Model Identification		4
	Preliminary Information		5
Contents	Glossary of Terms		5
	About the Control		5
	Power Failure Recovery		5
	Communications		5
	Control Identification		6
	Select Cycle Pads		6
	Display Identification		7
	Light Emitting Diodes (LEDs)		7
	Washer-Extractor Operation		8
	Start Up		8
	Door Locking Mode		8
	Stop Mode		8
	Start Mode		8
	End of Cycle Mode		8
	Cycle Sequence		8
	Run Mode		8
	Signals		8
	Special Features		9
	Programming Control		9
	Collecting Audit Information		9
	Testing Machine and Control Functions		9
	Rapid Advance Feature		9
	Communications Mode		9
	Entering the Manual Mode		10
	How to Enter the Manual Mode		10
	Manual Diagnostics		10
	Programming Control		11
	What Can Be Programmed?		11
	Programmable Options Available		11
	Manual Mode Flowchart		14
	Manual Programming Flowchart (1 of 3)		15
	Manual Programming Flowchart (2 of 3)		16
	Manual Programming Flowchart (3 of 3)		17
	Diagnostic Tests Flowchart		18
	1.	Default Cycle “dCYC”	19
	2.	Audio Signal “AUd”	20
	3.	Error Code Programming “Err-”	22
	4.	Cycle Programming “Cy--”	26
	5.	Number of Balance Retries “bALr”
		(Variable Frequency Drives Only)	30
	6.	IR Access (On/Off) “IrA”	31
	7.	Fahrenheit/Celsius “t FC”	31
	8.	Hot Water Temperature “FH”	32
	9.	Warm Water Temperature “FHC”	32
	10.	Cold Water Temperature “FC”	33
	11.	Cooldown Enable/Temperature “Codn”	33
	12.	Production Test Cycle (On/Off) “PtEn”	34
	13.	Manual Rapid Advance (On/Off) “rAEn”	34
	14.	No Cycle Time Display “nCtd”	35
	15.	Programmable Cycle Time Display “PCtd”	35

© Copyright 2010, Alliance Laundry Systems LLC

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.

2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208801