Chlorine bleach compartment
(Letter D in Dispenser Illustration)
Add no more than 1/3cup (80 mL) liquid chlorine bleach to this compartment, The bleach will be automatically diluted and dispensed at the best time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach,
•Always measure liquid chlorine bleach, Use a measuring cup with a pour spout; do not guess.
•Do not fill beyond the "MAX" level.
NOTE: Overfilling could cause severe garment damage.
Fabric Softener compartment (Letter E in Dispenser Illustration)
Add 1/4cup (60 mL) liquid fabric softener to this compartment. Fabric softener will be automatically dispensed in the final rinse.
•Do not fill beyond the "MAX" level,
1.To pause the washer at any time, select PAUSE/CANCEL
2.To continue the cycle, select and hold START (for approximately 1 second).
Not all Options and Modifiers are available with all Cycles. Cycles, Options and Modifiers can be changed anytime before START is selected.
Options and Modifiers can be changed anytime after START is selected and before the start of the selected Option or Modifier.
To cancel a cycle and select a new cycle
1.Select PAUSE/CANCELtwice.
2.Select desired cycle.
3.Select the desired OPTIONS and MODIFIERS.
4.Select and hold START (for approximately 1 second) to restart the washer at the beginning of the new cycle.
To cancel a cycle
1.Select PAUSE/CANCEL twice.
2.The washer powers down, the door unlocks, and clothes can be removed.
NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks.
To change Options and Modifiers after the cycle has started
1.Select PAUSE/CANCEL
2.Select the desired OPTIONS or MODIFIERS.
3.Select and hold START (for approximately 1 second) to continue the cycle.
To drain the washer manually
1.Select PAUSE/CANCEL
2.Select DRAIN & SPIN.
3.Select and hold START (for approximately 1 second) to begin the drain.
4.When the spin is complete, the door unlocks. Items can be removed from the washer.
These lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional item to the wash cycle and when the controls are locked.
STATUS
AbD A GARMN @
PkEWASI@
WAS @
RINS8@
SH @
CLOTHESO! EAN0
CONIROI I OCKS')0
DOORIOOKEDO
Adding items
You can add items to the washer after the cycle has started for Normal/Casual, Heavy Duty or Whitest Whites if the ADD A GARMENT status light is glowing.
To add items
1.Select PAUSE/CANCEL The washer door unlocks, and items can be added.
2.To continue the cycle, close the door and select and hold START (for approximately 1 second).
3.To unlock the door after the Add A Garment period, press Pause/Canel twice. This will cancel the Wash Cycle.
Clothes Clean
The Clothes Clean light stays on for 5 minutes after the cycle is complete. The washer will then power down.
Locking controls
The Control Lock prevents unintended use of the washer. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle, When CONTROL LOCKED is lit, all buttons are disabled except for Pause/Cancel and Start. You can lock the controls while the washer is operating,
To lock the controls
Select and hold DRAIN & SPIN for 3 seconds.
DRAIN & SPIN
PRESS & HOLD 3
SECONDS[OLOCK/
UNIC)CK CONTROL
The CONTROL LOCKED status light glows.
To unlock the controls
Select and hold DRAIN & SPIN for 3 seconds until the CONTROL LOCKED Status light turns off,
Door Lock
When the DOOR LOCKEDstatus light glows, the door is locked.
Estimated Time Remaining
The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load. The cycle time will be extended if oversudsing occurs or the load is unbalanced. The SUDs routine removes extra suds and assures proper rinsing
of your garments. During the unbalance routine the time displayed may pause until this activity is complete, then resume with the remainder of the cycle.
14