Whirlpool W10113000A Installation Requirements, Tools andParts, Parts supplied, Alternate Parts

INSTALLATION REQUIREMENTS

Tools andParts

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

■ Pliers that open to 1⁹⁄₁₆"	■ Flashlight (optional)
(3.95 cm)

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

Parts supplied:

ABC

D

A. Drain hose form

B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)

D. Beaded tie strap

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the “Assistance or Service” section.

If You Have:	You Will Need to Buy:
Laundry tub or	Sump pump system (if not already
standpipe taller	available)
than 96" (2.4 m)
1" (2.5 cm)	2" (5 cm) diameter to 1" (2.5 cm)
diameter standpipe	diameter standpipe adapter,
	Part Number 3363920 and connector kit
	Part Number 285835
Overhead sewer	Standard 20 gal. (76 L) 39" (99 cm) tall
	drain tub or utility sink, sump pump and
	connectors (available from local
	plumbing suppliers)
Floor drain	Siphon break, Part Number 285834;
	additional drain hose,
	Part Number 8318155 and connector kit,
	Part Number 285835
Water faucets	2 longer water fill hoses:
beyond reach of fill	6 ft (1.8 m) Part Number 76314,
hoses	10 ft (3.0 m) Part Number 350008
Lint clogged drain	Drain protector, Part Number 367031

Tools needed for securing the drain hose and leveling the washer:

■	Adjustable or open end	■	Wood block
	wrench ⁹⁄₁₆" (14 mm)	■	Ruler or measuring tape
	Level
■

4