English
AUTO DRY CYCLE
HDE/HDG5300AW, CHDE5300AW
1. Touch the Power On/Off pad
•The computer board will beep once and the dryer will change from off status to the initial operating status (NORMAL program).
•If the “Start/Pause” pad is not touched in 5 min after powering on, it automatically cuts off power and returns to off status.
•The dryer returns to off status immediately upon end of each cycle. Regardless, the status of the control panel, touching OFF will stop all operations.
•The default status is “NORMAL” program.
2.Touch
•The Normal program will be automatically selected after powering on. If another full automatic program is desired, touch
•To select your desired settings, the “Custom Program” function should be chosen.
•The dryer can memorize programs defined by user and display the previous program upon next application of this function.
3.Touch “Dry Level” pad to select a suitable drying level.
4.Touch “Temperature” pad to select a suitable temperature.
5.Touch “Signal” pad, and the buzzer will sound upon end of a cycle.
•The user may define three prompt sound conditions: “Louder”, “Softer” and
“Off”.
6.Touch the “Wrinkle Saver” pad to select a suitable reserved drying program.
•This convenient feature helps keep wrinkles from setting when you cannot unload the dryer at the end of a cycle. The dryer will stop and then tumble for a brief period every few minutes. Press the wrinkle saver pad to activate. Stop the setting at any time by pressing the wrinkle saver pad or opening the dryer door. This feature will work for 1 hour after the drying program is complete.
27