English
CONNECTING THE DRYER TO THE GAS SUPPLY
A)Connect female 3/8” NPT elbow to gas inlet on dryer. Then connect 3/8” flare union adapter to female elbow.
IMPORTANT: To prevent the inlet from twisting, please use a pipe wrench to secure the dryer gas inlet. Affix Teflon® tape or pipe compound to adapter and gas inlet.
B)Attach the flexible metal gas line connector to the adapter.
C)Make sure flexible gas line seal is secure. Use two wrenches for the best possible connection.
D)To check gas inlet pressure, attach 1/8” NPT plugged tapping to dryer gas line shut- off valve. Then connect flare union adapter to plugged tapping. Affix Teflon® tape to the threads of the adapter and plugged tapping to ensure seal.
E)Use two adjustable wrenches to tighten every connection.
IMPORTANT: Do not overtighten!
F) Open gas
18