ADC AD-464 service manual ADG-464 GAS, Electrical Service Specifications

C. ELECTRICAL SERVICE SPECIFICATIONS

1.Gas Models

ADG-464 (GAS)

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)*

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

NOTES: A. Fuse ratings are dual-element, time-delay, current limiting, class RK1 or RK5 ONLY.

B.Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C.Circuit breakers for 3Ø dryers must be 3-pole type.

SERVICE	PHASE	WIRE	APPROX.		FUSING	CIRCUIT
			AMP DRAW
					Dual Element
VOLTAGE		SERVICE				BREAKER
			60 Hz	50 Hz	Time Delay
208	3ø	3/4	107	---	150	150
240	3ø	3/4	101	98	150	150
380-400	3ø	3/4	---	53	80	90
416	3ø	3/4	---	51	60	90
460/480	3ø	3/4	51	---	60	90

DEDICATED SPRINKLER SERVICE**

Dryer Nameplate 1ø

---

2

3.5

5

*Contact factory for information not listed.

**Minimum wire size is #16 AWG Stranded Type Wire...for individual lengths less than 100 feet.

2.Steam Models

ADS-464 (STEAM)

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)*

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

NOTES: A. Fuse ratings are dual-element, time-delay, current limiting, class RK1 or RK5 ONLY.

B.Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C.Circuit breakers for 3Ø dryers must be 3-pole type.

SERVICE	PHASE	WIRE	APPROX.		FUSING	CIRCUIT
			AMP DRAW
					Dual Element
VOLTAGE		SERVICE				BREAKER
			60 Hz	50 Hz	Time Delay
200	3ø	3	117	---	150	150
208	3ø	3/4	102	---	150	150
240	3ø	3/4	96	94	125	150
380-400	3ø	3/4	---	51	60	90
416	3ø	3/4	---	51	60	90
460/480	3ø	3/4	49	---	60	90

DEDICATED SPRINKLER SERVICE**

Dryer Nameplate 1ø

---

2

3.5

5

*Contact factory for information not listed.

**Minimum wire size is #16 AWG Stranded Type Wire...for individual lengths less than 100 feet.

NOTE: ADC reserves the right to make changes in specifications at any time, without notice or obligation.

11