Listening to your system
Making an audio recording
You can make an audio recording from any audio source connected to the amplifier.
1Select the source you want to record. Use the input select buttons (INPUT SELECTOR).
2Prepare the source you want to record. Tune to the radio station, load the CD, set up the turntable, etc.
3Prepare the recorder.
Insert a blank tape, MD, etc. into the recording device and set the recording levels.1
Refer to the instructions that came with the recorder if you are unsure how to do this.
4Start recording, then start playback of the source component.
Note
1 The amplifier's volume, balance and tone controls have no effect on the recorded signal.
04
English Deutsch Français Italiano Nederlands Español
13
En