Mitsubishi Electronics FR-F700 instruction manual Parameter List, Remarks, Function

Parameter List

For simple variable-speed operation of the inverter, the initial setting of the parameters may be used as they are. Set the necessary parameters to meet the load and operational specifications. Parameter setting, change and check can be made from the operation panel (FR-DU07). For details of parameters, refer to the instruction manual.

POINT

Only simple mode parameters are displayed by the initial setting of Pr.160 User group read selection. Set Pr.160 User group read selection as required.

￿Simple mode parameter

Parameter	Name	Range	Increments	Initial Value	Refer to
Number					page
0	Torque boost	0 to 30%	0.1%	6/4/3/2/1.5/1%*2	28
1	Maximum frequency	0 to 120Hz	0.01Hz	120/60Hz*1	28
2	Minimum frequency	0 to 120Hz	0.01Hz	0Hz	28
3	Base frequency	0 to 400Hz	0.01Hz	60Hz	28
4	Multi-speed setting (high speed)	0 to 400Hz	0.01Hz	60Hz	28
5	Multi-speed setting (middle speed)	0 to 400Hz	0.01Hz	30Hz	28
6	Multi-speed setting (low speed)	0 to 400Hz	0.01Hz	10Hz	28
7	Acceleration time	0 to 3600/ 360s	0.1/0.01s	5s/15s*3	28
8	Deceleration time	0 to 3600/ 360s	0.1/0.01s	10s/30s*3	28
9	Electronic thermal O/L relay	0 to 500/ 0 to 3600A*1	0.01/0.1A*1	Rated inverter	29
				output current
60	Energy saving control selection	0, 4, 9	1	0	34
79	Operation mode selection	0, 1, 2, 3, 4, 6, 7	1	0	37
125	Terminal 2 frequency setting gain frequency	0 to 400Hz	0.01Hz	60Hz	39
126	Terminal 4 frequency setting gain frequency	0 to 400Hz	0.01Hz	60Hz	39
160	User group read selection	0, 1, 9999	1	9999	40

￿Extended mode parameter

Remarks

⋅The parameters marked with ￿ indicate simple mode parameters.

⋅The shaded parameters in the table allow its setting to be changed during operation even if "0" (initial value) is set in Pr. 77 Parameter write selection.

Function	Parameters	Name	Setting Range	Increments	Initial Value	Refer to
						page
	￿ 0	Torque boost	0 to 30%	0.1%	6/4/3/2/1.5/1%*2	28
	￿ 1	Maximum frequency	0 to 120Hz	0.01Hz	120/60Hz*1	28
functions	￿ 2	Minimum frequency	0 to 120Hz	0.01Hz	0Hz	28
	￿ 5	Multi-speed setting (middle speed)	0 to 400Hz	0.01Hz	30Hz	28
	￿ 3	Base frequency	0 to 400Hz	0.01Hz	60Hz	28
	￿ 4	Multi-speed setting (high speed)	0 to 400Hz	0.01Hz	60Hz	28
Basic
	￿ 6	Multi-speed setting (low speed)	0 to 400Hz	0.01Hz	10Hz	28
	￿ 7	Acceleration time	0 to 3600/ 360s	0.1/0.01s	5s/15s*3	28
	￿ 8	Deceleration time	0 to 3600/ 360s	0.1/0.01s	10s/30s*3	28
	￿ 9	Electronic thermal O/L relay	0 to 500/ 0 to 3600A*1	0.01/0.1A*1	Rated inverter	29
					output current
InjectionDC Brake	10	DC injection brake operation frequency	0 to 120Hz, 9999	0.01Hz	3Hz	29
	11	DC injection brake operation time	0 to 10s	0.1s	0.5s	29
	12	DC injection brake operation voltage	0 to 30%	0.1%	4/2/1%*4	29
	13	Starting frequency	0 to 60Hz	0.01Hz	0.5Hz	29
	14	Load pattern selection	0, 1	1	1	29
Jog operation	15	Jog frequency	0 to 400Hz	0.01Hz	5Hz	29
	16	Jog acceleration/deceleration time	0 to 3600/360s	0.1/0.01s	0.5s	29

*1 Differ according to capacities. (55K or less/75K or more)

*2 Differ according to capacities. (0.75K/1.5K to 3.7K/5.5K, 7.5K/11K to 37K/45K, 55K/75K or more) *3 Differ according to capacities. (7.5K or less/11K or more)

*4 Differ according to capacities. (7.5K or less/11K to 55K/75K or more)

21