Mitsubishi Electronics FR-F700 instruction manual Controller/Speed, Series, Others, Manual

	Name	Type		Applications, Specifications, etc.						Applicable
										Inverter
Controller	Manual controller	FR-AX	For independent operation. With frequency meter, frequency
			setting potentiometer and start switch.
	DC tach. follower	FR-AL	For synchronous operation (1.5VA) by external signal (0 to
			5V, 0 to 10V DC) *
	Three speed selector	FR-AT	For	three speed	switching, among		high, middle	and	low
Controller/Speed
			speed operation (1.5VA) *
	Motorized speed setter	FR-FK	For remote operation. Allows operation to be controlled from
			several places (5VA) *
	Ratio setter	FR-FH	For ratio operation. Allows ratios to be set to five inverters.
			(3VA) *
	PG follower	FR-FP	For tracking operation by a pilot generator (PG) signal (3VA)
			*
			Master controller (5VA)			for parallel	operation of	multiple
Manual	Master controller	FR-FG
			(maximum 35) inverters. *							Shared among all
			For soft start and stop. Enables acceleration/deceleration in
	Soft starter	FR-FC								models
Series			parallel operation (3VA) *
	Deviation detector	FR-FD	For continuous speed control operation. Used in combination
			with a deviation sensor or synchro (5VA) *
FR	Preamplifier	FR-FA	Used as an A/V converter or arithmetic amplifier (3VA) *
	Pilot generator	QVAH-10	For tracking operation. 70V/35VAC 500Hz (at 2500r/min)
	Deviation sensor	YVGC-500W-NS	For continuous speed control operation (mechanical
			deviation detection). Output 90VAC/90°
Others	Frequency setting potentiometer	WA2W 1kΩ	For frequency setting. Wirewound 2W 1kΩ B characteristic
	Frequency meter	YM206NRI 1mA	Dedicated frequency meter (graduated to 120Hz). Moving-
			coil type DC ammeter
	Calibration resistor	RV24YN 10kΩ	For	frequency	meter	calibration.	Carbon film	type	B
			characteristic
	Inverter setup software	FR-SW1-SETUP-	Supports an inverter startup to maintenance.							Shared among all
	(FR Configrator)	WE								models

*Rated power consumption. The power supply specifications of the FR series manual controllers and speed controllers are 200VAC 50Hz, 220V/ 220VAC 60Hz, and 115VAC 60Hz.

		Features
Peripheral Devices		Why energy		savings?
	Standard		Specifications
Outline		Dimension		Drawings
Terminal Connection	Diagram		Terminal Specification		Explanation
	Operation		Panel
	Parameter		List
Explanations		of		Parameters
	Protective		Functions
		Options
		Instructions
		Motor
		Compatibility
		Warranty
		Inquiry

50