Mitsubishi Electronics FR-F700 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 117, 118, 123

Function	Parameters	Name		Setting Range	Increments	Initial Value	Refer to
							page
	66	Stall prevention operation reduction	0 to 400Hz		0.01Hz	60Hz	30
		starting frequency
Retry	67	Number of retries at alarm occurrence	0 to 10, 101 to 110		1	0	34
	68	Retry waiting time	0 to 10s		0.1s	1s	34
	69	Retry count display erase	0		1	0	34
	70	Special regenerative brake duty *2	0 to 10%		0.1%	0%	31
	71	Applied motor	0, 1, 2, 20		1	0	34
	72	PWM frequency selection	0 to 15/0 to 6, 25*1		1	2	35
	73	Analog input selection	0 to 7, 10 to 17		1	1	35
	74	Input filter time constant	0 to	8	1	1	36
	75	Reset selection/disconnected PU	0 to 3, 14 to 17		1	14	36
		detection/PU stop selection
	76	Alarm code output selection	0, 1,	2	1	0	36
	77	Parameter write selection	0, 1,	2	1	0	36
	78	Reverse rotation prevention selection	0, 1,	2	1	0	36
	￿ 79	Operation mode selection	0, 1, 2, 3, 4, 6, 7		1	0	37
Simple fluxmagnetic controlvector	80	Motor capacity (simple magnetic flux	0.4 to 55kW, 9999		0.01/0.1kW*1	9999	37
		vector control)	/0 to 3600kW, 9999*1
	90	Motor constant (R1)	0 to 50Ω, 9999		0.001Ω/	9999	37
			/0 to 400mΩ, 9999*1		0.01mΩ*1
	100	V/F1 (first frequency)	0 to 400Hz, 9999		0.01Hz	9999	38
V/F	101	V/F1 (first frequency voltage)	0 to 1000V		0.1V	0V	38
	102	V/F2 (second frequency)	0 to 400Hz, 9999		0.01Hz	9999	38
points
	103	V/F2 (second frequency voltage)	0 to 1000V		0.1V	0V	38
5	104	V/F3 (third frequency)	0 to 400Hz, 9999		0.01Hz	9999	38
Adjustable	105	V/F3 (third frequency voltage)	0 to 1000V		0.1V	0V	38
	106	V/F4 (fourth frequency)	0 to 400Hz, 9999		0.01Hz	9999	38
	107	V/F4 (fourth frequency voltage)	0 to 1000V		0.1V	0V	38
	108	V/F5 (fifth frequency)	0 to 400Hz, 9999		0.01Hz	9999	38
	109	V/F5 (fifth frequency voltage)	0 to 1000V		0.1V	0V	38
	117	PU communication station	0 to 31		1	0	38
connectorPU communication	118	PU communication speed	48, 96, 192, 384		1	192	38
	123	PU communication waiting time setting	0 to 150ms, 9999		1	9999	38
	119	PU communication stop bit length.	0, 1, 10, 11		1	1	38
	120	PU communication parity check	0, 1, 2		1	2	38
	121	Number of PU communication retries	0 to 10, 9999		1	1	38
	122	PU communication check time interval	0, 0.1 to 999.8s, 9999		0.1s	9999	38
	124	PU communication CR/LF presence/	0, 1, 2		1	1	38
		absence selection
	￿ 125	Terminal 2 frequency setting gain	0 to 400Hz		0.01Hz	60Hz	39
		frequency
	￿ 126	Terminal 4 frequency setting gain	0 to 400Hz		0.01Hz	60Hz	39
		frequency
	127	PID control automatic switchover	0 to 400Hz, 9999		0.01Hz	9999	39
		freqeuncy
operation	128	PID action selection	10, 11, 20, 21, 50, 51, 60,		1	10	39
			61
	129	PID proportional band	0.1 to 1000%, 9999		0.1%	100%	39
	130	PID integral time	0.1 to 3600s, 9999		0.1s	1s	39
PID	131	PID upper limit	0 to 100%, 9999		0.1%	9999	39
	132	PID lower limit	0 to 100%, , 9999		0.1%	9999	39
	133	PID action set point	0 to 100%, 9999		0.01%	9999	39
	134	PID differential time	0.01 to 10.00s, 9999		0.01s	9999	39

*1 Differ according to capacities. (55K or less/75K or more) *2 Setting can be made for the 75K or more.

23