Mitsubishi Electronics FR-F700 Pr. Parameter unit display language 145 selection, Pr Pr to

Page 39

Pr. Parameter unit display language 145 selection

Pr.145 PU display language selection

You can switch the display language of the parameter unit (FR- PU04) to another.

Pr.145 Setting

Description

0 (initial value)

Japanese

1

English

2

German

3

French

4

Spanish

5

Italian

6

Swedish

7

Finnish

Pr.

148, 149

 

Refer to the section about Pr. 22 and

 

 

other relevant parameters.

 

 

 

Pr. 150 to 153, 166, 167

Detection of output current (Y12 signal) detection of zero current (Y13 signal)

Pr.150

Output current detection level

Pr.151 Output current detection signal delay time

Pr.152

Zero current detection level

Pr.153 Zero current detection time

Pr.166 Output current detection signal retention time

Pr.167 Output current detection operation selection

The output current during inverter running can be detected and output to the output terminal.

(1)Output current detection

(Y12 signal, Pr. 150, Pr. 151, Pr. 166, Pr. 167)

⋅The output current detection function can be used for excessive torque detection, etc.

⋅If the output current remains higher than the Pr. 150 setting during inverter operation for longer than the time set in Pr. 151, the output current detection signal (Y12) is output from the inverter's open collector or relay output terminal.

Pr.

Selection of action conditions of

155 the second function signal (RT)

Pr.155 RT signal reflection time selection

You can select the second function using the external terminal (RT signal).

You can also set the RT signal operation condition (reflection time).

Pr.155 Setting

Description

0 (initial value)

This function is immediately made valid with on

of the RT signal.

 

 

This function is valid only during the RT signal

10is on and constant speed operation. (invalid during acceleration/deceleration)

⋅Functions that can be set as second functions

Function

First Function

Second Function

Parameter Number

Parameter Number

 

Torque boost

Pr.0

Pr.46

Base frequency

Pr.3

Pr.47

Acceleration time

Pr.7

Pr.44

Deceleration time

Pr.8

Pr.44, Pr.45

Electronic thermal O/L

Pr.9

Pr.51

relay

 

 

Stall prevention

Pr.22

Pr.48, Pr.49

Pr.

156, 157

 

Refer to the section about Pr. 22 and

 

 

other relevant parameters.

 

 

 

Pr. 158 Refer to the section about Pr. 54 and other relevant parameters.

Pr.

159

 

Refer to the section about Pr. 135 and other

 

 

relevant parameters.

 

 

 

Pr. 160 Pr. 172 to 174

Display of applied parameters and user group function

Pr.160 User group read selection

Pr.172

User group registered display/batch clear

Pr.173

User group registration

Pr.174 User group clear

￿ Parameter which can be read from the operation panel and parameter

unit can be restricted.

 

 

Features

 

 

 

 

 

 

 

 

Peripheral Devices

Why energy

savings?

 

 

 

 

 

 

 

Standard

Specifications

 

 

 

 

 

 

 

Outline

Dimension

Drawings

 

 

 

 

 

 

 

 

 

 

 

 

Terminal Connection

Diagram

Terminal Specification

Explanation

 

 

 

 

 

 

 

Operation

Panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

List

 

 

 

 

 

 

 

 

 

 

 

 

 

Explanations

of

Parameters

 

 

 

 

 

 

 

Protective

Functions

 

Pr.166 9999, Pr.167 = 0

Pr.150

Output current

Pr.151

Pr.166

Time

In the initial setting, only the simple mode parameters are displayed.

Pr. 160

Description

Setting

 

9999

 

(initial

Only the simple mode parameters can be displayed.

value)

 

0

Simple mode+extended parameters can be displayed.

Options

Minimum 100ms (initial value)

Output current

OFF

 

OFF

detection signal

ON

(Y12)

 

 

 

(2)Zero current detection (Y13 signal, Pr. 152, Pr. 153)

⋅If the output current remains lower than the Pr. 152 setting during inverter operation for longer than the time set in Pr. 153, the zero current detection (Y13) signal is output from the inverter's open collector or relay output terminal.

Output current

 

 

 

 

Pr.152

Pr.152

 

 

0[A]

 

 

 

 

100ms*

Time

 

 

 

Start signal OFF

ON

 

 

 

Zero current

OFF

ON

OFF

ON

detection time

 

Pr. 153

Pr. 153

 

(Y13)

 

 

 

Detection time

Detection time

 

 

*Once turned on, the zero current detection time (Y13) signal is held on for at least 100ms.

Pr. 154

 

Refer to the section about Pr. 22 and other

 

 

relevant parameters.

1

Only parameters registered to the user group can be displayed.

(1) Display of simple mode parameters and extended

parameters (Pr.160)

⋅ When Pr. 160 = "9999" (initial value), only the simple mode

 

parameters can be displayed on the operation panel (FR-

 

DU07) and parameter unit (FR-PU04).

⋅

When “0” is set in Pr. 160, simple mode parameters and

 

extended parameters can be displayed.

(2) User group function (Pr.160, Pr.172 to Pr.174)

⋅

The user group function is designed to display only the

 

parameters necessary for setting.

⋅ From among all parameters, a maximum of 16 parameters can

 

be registered to a user group. When Pr. 160 is set in "1", only the

 

parameters registered to the user group can be accessed. (The

 

parameters not registered to the user group cannot be read.)

⋅ To register a parameter to the user group, set its parameter

 

number to Pr. 173.

⋅ To delete a parameter from the user group, set its parameter

 

number to Pr. 174. To batch-delete the registered parameters, set

 

Pr. 172 in "9999".

Instructions

 

 

Motor

 

 

Compatibility

 

Warranty

 

 

Inquiry

 

Pr. indicates simple mode parameters and Pr. indicates extended parameters. When setting parameters, refer to the instruction manual (applied) and understand instructions.

40

Page 38 Page 40
Image 39
Page 38 Page 40
Contents FR-F700 Energy savings for buildings and factories as a whole Warranty Inquiry Outline Dimension DrawingsInverter FR-F700 Connection with Peripheral DevicesInverter control Why Can the Inverter Save Energy?Damper control discharge side AmountType FR-F740-K Standard SpecificationsRating Type FR-F720-KOpen collector Common specificationsCan be selected Operating statusFR-F740-0.75K to 2K are not provided With a cooling fan Outline Dimension DrawingsInverter Type FR-F720-0.75K 110 FR-F720-1.5K 125Not provided with a Wiring coverFR-F740-15K, 18.5K FR-F720-30K is310 190 FR-HEL-H90K Inverter Type MassFR-F740-75K 140 120 295 185 FR-HEL-H75K FR-F740-90K 150 130Mass DC reactor suppliedFR-F740-110KFR-HEL-H110K Mass kgMass Remove the eye nut after installation of the productParameter List Remove the eye nut after installation of the productFR-F740-400KFR-HEL-H400K FR-F740-450KFR-HEL-H450KM3 screw Cable Panel cutting dimension drawingOutline drawing Panel FR-DU07Control circuit Terminal Connection DiagramOption connector Main circuitTerminal Specification Explanation TypeTerminal Name Description Output Relay output 1 alarmPreset detected frequency. *1 RelayExplanation of the Operation Panel FR-DU07 Operation mode switchover SettingBasic operation Function Name Setting Range Increments Initial ValueParameter List RemarksJump 24 to103 100101 102144 135139 143181 178179 180264 261262 263883 867872 882Explanations of Parameters Maximum/minimumFrequency Starting frequency Jog operationPr , 23, 48, 49, 66, 148, 149, 154, 156 Speed and remote settingStall prevention operation Input compensation of multiSetting Pr , 70 Selection of regeneration unitSpeed display and speed Pr , 54, 158, 170, 171, 268, 563, 564, 867 Pr , 58, 162 to 165, 299 Pr Remote setting functionConnection diagram Pr.59 Setting DescriptionUse the constant torque motor Retry function at alarmPr Energy saving control selection OccurrencePr , 242, 243, 252, 253 Carrier frequency and SoftPWM selectionAnalog input selection Pr , 240Pr Prevention of parameter rewrite Pr. Reset selection, disconnected PU 75 detectionPr Output function of alarm code Pr. Noise elimination at the analog 74 inputLED Indication Pr Pr Operation mode selectionPr. Simple magnetic flux vector 80, 90 control OffPr to 124, 331 to 337, 341 to 343 Adjustable 5 points V/FCommunication initial setting Pr toAnalog input display unit changing Pr Pr Pr Pr , C2902 to C7905Pr to 134, 575 to 577 PID control Analog input bias/gain calibrationPr Pr to Second function signal RTPr. Parameter unit display language 145 selection Selection of action conditionsFunction assignment Pr. Operation selection of the 161 operation panelTerminal assignment Pr to 196 output terminalPr to 247 Slip compensation Pr. Selection of motor stopping 250 method and start signalInput/output phase failure Pr Increase cooling fan lifeOperation at instantaneous 261 to 266 power failurePower failure stop mode Pr.261 = Pr Parameter for manufacturer setting. Do not setRemote output function To determine Maintenance time of partsPr to 497 REM signal Pr to 557 monitor signal882 to 886 function Pr. Regeneration avoidanceFree parameter Pr to 899 Energy saving monitorPr , CL, ALLC, Er.CL, Pcpy Pr PU contrast adjustmentPr. C0900, C1901 Adjustment of terminal FM AM calibration Parameter clear, parameter copyRegenerative overvoltage shut Error message *2 Minor fault *4 Major failures *5Protective Functions Function Name Description IndicationOptions Instructions Motor Supply short circuit RS-485 terminals power Was shortedOptions Option and Peripheral DevicesManual Controller/SpeedSeries OthersSpecifications, Structure, etc Stand-alone optionName type Name type Specifications, Structure, etc FR-BU-HK FR-BR-HKConnection example Resistor unit Resistance Mass Type Value Outline dimension drawingsExternal connection diagram CableConverter Outline dimension Unit mm FR-HC- HK High power factorCapacitor for sine wave filter Circuit configuration and connectionApplication of the sine wave filter Application conditionPeripheral devices list Standard Breaker EMC FilterOn mA Precautions for Operation/Selection Precautions for Peripheral Device Selection Noise Leakage currentsNoise reduction examples Connect the AC reactor or DC reactor Input Target Measures PowerThree 7kW Reference materials Phase Input Target Measures Power CapacitySuppressing the surge voltage on the inverter side Application to Motor60Hz torque reference 50Hz torque referenceFR-F500 L FR-F700 Warranty FA Center in Korea FA Center in North AmericaFA Center in Taiwan FA Center in Asean
Top Page Image Contents