Mitsubishi Electronics FR-F700 867, 872, 882, 883, 884, 885, 886, 888, 889, 891, 892, 893, 894

Function	Parameters	Name	Setting Range	Increments	Initial Value	Refer to
						page
	867	AM output filter	0 to 5s	0.01s	0.01s	32
	872	Input phase failure protection selection	0, 1	1	0	42
Regeneration functionavoidance	882	Regeneration avoidance operation	0, 1	1	0	45
		selection
	883	Regeneration avoidance operation level	300 to 800V	0.1V	380V/760V*1	45
	884	Regeneration avoidance at deceleration	0 to 5	1	0	45
		detection sensitivity
	885	Regeneration avoidance compensation	0 to 10Hz, 9999	0.01Hz	6Hz	45
		frequency limit value
	886	Regeneration avoidance voltage gain	0 to 200%	0.1%	100%	45
Free parameter	888	Free parameter 1	0 to 9999	1	9999	45
	889	Free parameter 2	0 to 9999	1	9999	45
	891	Cumulative power monitor digit shifted	0 to 4, 9999	1	9999	32
		times
monitor	892	Load factor	30 to 150%	0.1%	100%	45
	893	Energy saving monitor reference (motor	0.1 to 55/0 to 3600kW*2	0.01/0.1kW*2	Inverter rated	45
		capacity)			capacity
saving	894	Control selection during commercial	0, 1, 2, 3	1	0	45
		power-supply operation
Energy	895	Power saving rate reference value	0, 1, 9999	1	9999	45
	897	Power saving monitor average time	0, 1 to 1000h, 9999	1	9999	45
	896	Power unit cost	0 to 500, 9999	0.01	9999	45
	898	Power saving cumulative monitor clear	0, 1, 10, 9999	1	9999	45
	899	Operation time rate (estimated value)	0 to 100%, 9999	0.1%	9999	45
	C0	FM terminal calibration				46
	(900)				
	C1	AM terminal calibration				46
	(901)				
	C2	Terminal 2 frequency setting bias	0 to 400Hz	0.01Hz	0Hz	39
	(902)	frequency
parameters	C3	Terminal 2 frequency setting bias	0 to 300%	0.1%	0%	39
	(902)
	125	Terminal 2 frequency setting gain	0 to 400Hz	0.01Hz	60Hz	39
	(903)	frequency
Calibration	C4	frequency	0 to 300%	0.1%	100%	39
	(904)
	(903)	Terminal 2 frequency setting gain
	C5	Terminal 4 frequency setting bias	0 to 400Hz	0.01Hz	0Hz	39
	C6	Terminal 4 frequency setting bias	0 to 300%	0.1%	20%	39
	(904)
	126	Terminal 4 frequency setting gain	0 to 400Hz	0.01Hz	60Hz	39
	(905)	frequency
	C7	Terminal 4 frequency setting gain	0 to 300%	0.1%	100%	39
	(905)
	989	Parameter copy alarm release	10/100	1	10/100*2	-
PU	990	PU buzzer control	0, 1	1	1	46
	￿ 991	PU contrast adjustment	0 to 63	1	58	46
Clear parameters	Pr.CL	Parameter clear	0, 1	1	0	46
	PCPY	Parameter copy	0, 1, 2, 3	1	0	46
	ALLC	All parameter clear	0, 1	1	0	46
	Er.CL	Alarm history clear	0, 1	1	0	46

*1 The initial value differs according to the voltage class. (200V class / 400V class) *2 Differ according to capacities. (55K or less/75K or more)

27