A&D HC-30Ki, HC-15Ki, HC-3Ki, HC-6Ki manual Front Panel Overview

2. Front Panel Overview

8

The M+ annunciator comes ON when Count data is being accumulated.

The SAMPLE TOO LIGHT annunciator comes ON when the unit weight is too light.

WEIGHT Display.

The STABLE annunciator comes ON when the weighing data is stable.

The TARE ENTERED annunciator comes ON when the TARE weight is subtracted.

The TOTAL
annunciator comes	The	PRINT	key
ON when the COUNT	sends Count, Weight
display is showing the	or Unit Weight data.
TOTAL value.
	Comparator results,
COUNT (pcs) Display.	HI/OK/LO.

The TOTAL key displays the accumulated data on the count display and also back again.

The M+ key accumulates the Count data.

The ½ key displays comparator limits, works as M- key or toggles the weighing units lb/kg (USA version only).

The key sets or recalls target weight to use the AWA function.

The RESET key clears the Unit Weight data in memory (but not in ID memory).

			F
The	0 ~ 9 & .
10-keys send numbers
to the display.
			t
The	C key clears
the display 10-key
input.
			n
The	SAMPLE	key is
used when entering
sample size.			O

The KEYBOARD key is used when unit weight is to be entered via the 10-key pad.

The ZERO annunciator comes ON when the scale is at the center of ZERO.

The ACAI annunciator comes ON when weight is within the ACAI range. When meeting the ACAI addition range, it will blink.

The ON/OFF

key turns the power ON and OFF.

The ZERO key returns the scale to the center of ZERO.

The TARE key subtracts the TARE weight.

The KEYBOARD TARE key allows entering a known TARE weight from the 10-key pad.

The annunciator comes ON when the battery is working

The annunciator comes ON when the number of additions to M+ is displayed

The STOREUNITWEIGHT key stores the unit weight on display to ID memory.

UNIT WEIGHT Display.

ID. Number (2 digit) is displayed when storing or recalling unit weight data.

e The ENTER key

enters Unit Weight, Sample Size, ID or other data into the scale from the 10-key pad.

The ID key is used when recalling unit weight data from ID memory.