A&D HC-15Ki, HC-3Ki Connecting the AD-8121 Printer / Mode, Command Mode, AD-8121 Printout Sample

13-5. Connecting the AD-8121 Printer / MODE 3

‰When using MODE 3 of the AD-8121 printer, printouts are obtained using the

PRINT

key (f-06-01 = 0), or auto-print mode A/B (f-06-01 =2 or 3).

‰The total data (accumulated by the number of additions to M+ memory.

M+

key) will be printed along with the

The AD-8121 / MODE 3 does not have statistical functions.

AD-8121 Printout Sample

MODE 1				MODE 3
		ID. Number		,'
473&		pcs (Count)		473&
:7NJ			Weight	67NJ
8:J		Unit Weight		8:J
				
473&				,'
:7NJ				473&
8:J				67NJ
				8:J
				
$43&	No. of Accum.			1
			TOTAL	727$/
				3&

13-6. Command Mode

‰In the command mode, the scale is controlled by commands that come from an external device, computer etc.

Do not set f-06-01="1" (stream mode) to use with the command mode. if you don’t want to use command mode together with key mode or auto-print mode, set f-06-01="4" (command mode only).

‰Use an optional cable below to connect with a computer.

AX-KO577A-200 RS-232C cable, for D-sub 25 pin, length 2m

AX-KO1786-200 RS-232C cable, for D-sub 9 pin, length 2m

(These cable have a DIN 7pin connector, but it can connect with the OP-03.)

AX-KO577A-200

D-Sub 9 pin	DIN 7 pin
female connector	connector
1	1
2	2
3	3
4	4
5	5
6	6
7	7

(Other pins: N.C.)

AX-KO1786-200

D-Sub 9 pin	DIN 7 pin
female connector	connector
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9

46