A&D HC-6Ki, HC-15Ki, HC-3Ki, HC-30Ki manual 888.8.88.50, 0000 Add, 0280 Add

5, 25, 50 or 100 Sample Size

1.The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan.

2. Press the SAMPLE key. Any tare
container will be automatically tared.	SAMPLE
The display will show “add” “10 pcs”.

COUNT

888.8.88.10

		WEIGHT	UNIT WEIGHT
If weight isn’t zero, press the TARE.		0000.	add
3. Press the SAMPLE	key to do	Æ 10 Æ 5 Æ 25 Æ 50 Æ 100
through the count size: of 5, 25, 50		888.8.88.50
or 100 pieces.	SAMPLE
‰ The larger the sample size, the more		WEIGHT	UNIT WEIGHT
accurate unit weight	registered.
(Example of selecting a sample size		0000.	add
of 50)

4.Place the selected number of sample pieces on the weighing pan (or in the tared container).

The weight of the pieces will be displayed.

COUNT

888.8.88.50

WEIGHT	UNIT WEIGHT
0280.	add

5. Press the ENTER key. Blinking

The display will show “-------” for a	ENTER
moment while calculating the unit
weight. After a moment the display will
show the count, total weight and unit
weight.

If the “add ##” appears on the unut weight display, then the sample size is not large enough for accurate counting

– add the additional number of sample pieces.

6.You may now begin counting operations for pieces of the same weight.

COUNT

8-------

WEIGHT UNIT WEIGHT

0280. add

COUNT

888.8.88.50

WEIGHT	UNIT WEIGHT
0280.	5.61200

13