A&D HC-15Ki, HC-3Ki, HC-30Ki, HC-6Ki manual 04-05, 05-01 05-02 05-04 05-05, Comparator

f-04-05

‰Auto power-off

0	Auto power-off disabled.
1	Auto power-off enabled.

‰“f-04-06” is for factory use and should be “0”.

F-05-X Comparator

f-05-01

f-05-02

f-05-03 f-05-04

f-05-05

‰Comparator Mode.

0	Comparator OFF.
1	Compare all data.
2	Compare stable data.
3	Compare all data except when near ZERO*.
4	Compare stable data except when near ZERO*.
5	Compare all positive data except when near ZERO*
6	Compare stable positive data except when near ZERO*.

*“near ZERO” means between –4d and +4d of weight data.

‰Data to Compare – Count or Weight

0	Compare count data.
1	Compare weight data.

‰Upper Limit.

0	Enter via the 10-key pad.
	Use the . key to “set minus value.

‰Lower Limit.

0	Enter via the 10-key pad.
	Use the . key to set minus value.

‰A Beeper With Comparator Results.

These are beeps for the comparator, not for the key operation.

000				All Comparator Beepers are OFF.
						Example:	010
000
				0	= Beeper OFF	The OK beep sounds – HI & LO doesn't
	HI		LO	1	= Beeper ON	sound. The scale will beep continuously
		OK				when display meets OK condition.

34