A&D HC-15Ki, HC-3Ki, HC-30Ki, HC-6Ki manual 888.8.88.20, 0000 Add, 0112 Add

Desired Sample Size

1.The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you

are going to use a tare container, place it on the weighing pan.

2. Press the SAMPLE key. Any tare
container will be automatically tared.	SAMPLE
The display Will show “add ” “10 pcs”.
If weight isn’t zero, press the TARE.

COUNT

888.8.88.10

WEIGHT	UNIT WEIGHT
0000.	add

3.Use the 0 Æ 9 10-key pad to display the sample size desired.

‰If you hit the wrong key, press

the C key to clear and start again. (Example of selecting a sample size of 20)

4.Place the selected number of sample pieces on the weighing

pan (or in the tared container). The weight of the pieces will be displayed.

COUNT

888.8.88.20

WEIGHT	UNIT WEIGHT
0000.	add

COUNT

888.8.88.20

WEIGHT	UNIT WEIGHT
0112.	add

5. Press the ENTER key. Blinking

The display will show “-------” for a	ENTER
moment while calculating the unit
weight. After a moment the display will
show the count, total weight and unit
weight.

If the “add ##” appears on the unut weight display, then the sample size is not large enough for accurate counting

– add the additional number of sample pieces.

6.You may now begin counting operations for pieces of the same weight.

COUNT

8-------

WEIGHT UNIT WEIGHT

0112. add

COUNT

888.8.88.20

WEIGHT	UNIT WEIGHT
0112.	5.61200

14