A&D HC-15Ki, HC-3Ki, HC-30Ki, HC-6Ki manual 88lo8bat, Charging the Battery

Page 44

Charging the Battery

WWhen the count display shows “lo bat”, the battery power is almost exhausted and should be recharged.

While the scale is operating with the battery, the

annunciator

will light.

‰The scale can be used while the battery is in charging. After fully charged, the scale will change the charging process to trickle charge automatically.

COUNT

88lo8bat

 

 

WEIGHT

 

UNIT WEIGHT

 

 

3108.

 

111000.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

‰Charge the battery at temperature between 0°C (32°F) and 40°C (104°F). Preferably 5°C (41°F) ~ 35°C (95°F) is recommended.

‰Charge the battery when using for the first time.

‰The battery must be recharged regularly if the scale is not used for long time. Every 3 months in the warmer area and every 6 months in the cool area will be needed.

‰Be sure to use the AC adapter that provided with the HC-i.

42

Image 44
Contents Counting Scale This manual and Marks Contents AWA Audible Weighing Assist Introduction FeaturesIntroduction Unpacking Parts OverviewSetting Up Your Scale Best Conditions For WeighingCalibration ON/OFFId-00 Total880000.880.00000 0000 Automatic Last Unit Weight Used888.8.888.0 Front Panel Overview Turn The Power on and OFF Basic Operations880000.8 Basic OperationsTare TareTo Start Counting Unit Weight By a Sample 888.8.88.10Add Add0280 Add 888.8.88.500000 Add 0112 Add 888.8.88.200000 Add Key 888.8.882.00000 0000 Lo ut Unit Weight By Keyboard888.8.8810 Unit Weight By ID Number Reset0000 Id-00 Id-12Entering a Tare Weight Using the Keyboard Tare Key888.8.881.0 0615888.8.-554 888.8-554To Clear Tare EitherId-00 Store Unit WeightStore Unit Weight by ID Numbers Clear Id-00 Clear Id-12Clear idall Clearing All ID Memories at OnceUnit Weight, Tare & Comparator Limits Memorized Key, the tare and/or comparator limitsUsing the M+ Memory Adding Using the M+ KeyM+ Memory Function To Erase the Last M+ AdditionAutomatic M+ Accumulation Mode Viewing the M+ TotalClearing the M+ Total M- Function88888100 8f-00810 8f-05810Comparator Function To Set the Comparator888.8 888.8.-102888.8.-198 Viewing Comparator LimitsCalibration Procedure Using a Weight 888Cal02888Cal10 CalibrationCal 5001 5000Cal f 5000 50009800 Gravity CompensationTo Change or View F-Function Settings Function Parameters00-01 00-0201-01 01-02Acai Operation & Min. Unit Weight 01-0502-01 02-0203-01 03-0204-01 04-02Comparator 04-0505-01 05-02 05-04 05-05 06-01 06-02 06-0306-04 RS-232C Data Output06-05 09-0109-02 09-X Key88888828 88888821Acai Function Acai Automatic OperationAcai Manual Operation Pcs OnWeighing Pan Addition Range Stable AcaiTo Enable/Disable AWA Function Off Mode Setting888.off02 AWA Function888.of100 888.of150Target IntOP-02 Battery Using OP-02 SLA BatteryCharging the Battery 88lo8batInstallation RS-232C SpecificationsOP-03 RS-232C Serial Interface AsciiData Output Mode Data Output Mode f-06-011100 Data to be Sent f-06-02Connecting the AD-8121 Printer / Mode 1 or Mode Print Operations SettingsExample of f-06-02settings Baud Rate f-06-04AD-8121 Printout Sample Connecting the AD-8121 Printer / ModeCommand Mode Command List Acknowledgment and Error Codes‰ Weight Data Data Format‰ Unit Weight ‰ Store the specified F-Function setting value Using UFC Universal Flex Coms Function Store Text Data into the Scale MemoryExamples of PF command and AD-8121 Printout Sample Data Format for the Scale DataMaximum rating of the Relay Output OP-04 InstallationComparator Relay Output Circuit Specifications ModelGravity Acceleration MAP Values of gravity at various locationsWorld map Blank