A&D HC-3Ki, HC-15Ki, HC-30Ki, HC-6Ki manual 06-01 06-02, 06-03, 06-04, RS-232C Data Output

F-06-X RS-232C Data Output

F-06-X requires OP-03 or OP-04 RS-232C interface.

f-06-01

f-06-02

‰ Data Out Mode

0	Key Mode: Data is sent by pressing the	PRINT	key.
	+ Command Mode.
1	Stream Mode: Data is sent continuously.
	Command Mode cannot be used.
2	Auto-Print Mode A: Data is sent if the weight display is stable
	at +5d (weighing display division) and above.
	+ Command Mode.
3	Auto-Print Mode B: Data is sent if the weight display is
	stable, at ±5d (weighing display division) and above/below.
	+ Command Mode
4	Command Mode Only.
5	To use as Bar Code Reader Interface.
6	UFC format with Key Mode (see setting “0”).
7	UFC format with Auto-Print Mode A (see setting “2”).
8	UFC format with Auto-Print Mode B (see setting “3”).

‰Data to be Sent.

0100 Count data sent.

Unit

ID Weight

0000

Weight

PCS(count)

You select which data to be sent by keying in a

0or 1 for the data: ID no., PCS (count), weight or unit weight.

Example: Key in 1 1 0 0 to display 1100, this setting would send only the ID number and the count.

f-06-03

‰Data Format

0	Format for AD-8121 MODE 1.	No difference between “0”
		and ”1” when used with the
1	Format for AD-8121 MODE 3.
		UFC format.
2	Format for general apparatuses, computers, etc.

f-06-04

‰Baud Rate

0	2400 bps.
1	4800 bps.
2	9600 bps.

35