A&D HC-30Ki, HC-15Ki, HC-3Ki, HC-6Ki manual 888.8.88.10, Add, Unit Weight By a Sample, Sample Size

3-3. Unit Weight By a SAMPLE

10 Sample Size

1. The three UNIT WEIGHT BY LED’s should be blinking at this

point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan.

2. Press the	SAMPLE	key. Any tare
container will be automatically tared.			SAMPLE
The display Will show “add” “10 pcs”.

If weight isn’t zero, press the TARE.

COUNT

888.8.88.10

WEIGHT	UNIT WEIGHT
0000.	add

3.Place l0 sample pieces on the weighing pan (or in the tared

container).

The weight of all 10 pieces will be displayed.

4. Press the ENTER key.

The display will show “-------” for a

moment while calculating the unit weight. After a moment the display will show the count, total weight and unit weight.

ENTER

COUNT

888.8.88.10

	WEIGHT	UNIT WEIGHT
	0056.	add
	COUNT
8-------
	WEIGHT	UNIT WEIGHT

0056. add

At this point the scale may decide that 10 pieces is not a large enough sample size for accurate counting. If you see the “add ##” on the unut weight display, then add the additional number of sample pieces displayed.

‰You can ignore the “add ##” message and continue counting by pressing the ENTER key. However, the results may not be accurate. See F-Function f-01-02.

5.You may now begin counting operations for pieces of the same weight.

‰See “10. ACAI FUNCTION” for information concerning the ACAI counting accuracy function.

COUNT

888.8.88.10

	WEIGHT	UNIT WEIGHT
	0056.	5.61200
Total Weight		Unit Weight
The weight of all		The calculated
the sample pieces		weight of a unit.

COUNT

888.8.88.10

	SAMPLE HI	OK	LO
TOO LIGHT
	WEIGHT	UNIT WEIGHT
	0004.	add	15

Another 30 pieces

12