A&D HC-30Ki, HC-15Ki, HC-3Ki, HC-6Ki manual Data Format, ‰ Weight Data

‰If the command is S , T or <ACK><CR><LF> or <ACK> operation is completed.

Z , the scale will send a second acknowledgment (see F-Function “f-09-02”) when the command

If an error occurs, the scale will send an error code.

‰The error format is

E C , E n C LF , “n” being error number.

En	Definition	Notes
E0	Communication Error	Parity error, framing error, etc.
E1	Undefined command Error	Command does not exist for the scale.
E2	Scale not ready Error.	The scale is not in a state where a command
		could be expected.
E4	Too many characters Error	Command contains too many characters.
E6	Format Error	Command contains invalid characters.
E7	Out of range Error	Value is out of range. Tare weight is more than
		the capacity, etc.

Data Format

“ [

” in examples below shows “Space” (20H).

‰Examples below are for f-09-02=”0000”. <ACK>=06H.

‰Store unit weight and other value in use (according to f-01-05).

Command Reply

E , 1 2 C LF

ACK C LF

Stores to id-12. (E,000012CRLF is acceptable.)

‰ID Number

Command Reply

? I D C LF

I D , 0 0 0 0 1 2 C LF

‰PCS (Count ) Data

Command	?	Q	T	C	LF
Reply	Q	T	,	+	0	0	0	0	1	2	3	4	[	P	C	C	LF	Stable Positive Data
	U	S	,	-	0	0	0	0	5	6	7	8	[	P	C	C	LF	Unstable Negative Data
	O	L	,	+	9	9	9	9	9	9	9	9	[	P	C	C	LF	‘E’ display

‰Weight Data

Command	?	W	T	C	LF
Reply	S	T	,	+	0	0	1	.	2	3	4	6	[	k	g	C	LF	Stable Positive Data
	S	T	,	-	0	0	2	.	7	2	5	5	[	l	b	C	LF	Stable Negative Data
	U	S	,	-	0	0	1	2	.	3	4	6	[	l	b	C	LF	Unstable Negative Data
	U	S	,	+	0	0	0	5	.	5	9	3	[	k	g	C	LF	Unstable Positive Data
	O	L	,	+	9	9	9	9	.	9	9	9	[	k	g	C	LF	‘E’ display
	O	L	,	-	9	9	9	9	.	9	9	9	[	l	b	C	LF	‘-E’ display

48