A&D HC-6Ki, HC-15Ki, HC-3Ki, HC-30Ki manual Basic Operations, 880000.8, Turn The Power on and OFF

3. BASIC OPERATIONS

3-1. Basic Operations

ON

Turn The Power ON and OFF

1.Press the ON/OFF key to turn the power ON.

All the display symbols will turn on. After a few seconds, the display turns off once. Then, the scale will automatically take zero (power-on zero) and the display shows zero.

TOTAL

M+

STABLE

TARE

ENTERED ZERO

OFF

COUNT

88.8.88..8.8

SAMPLE	HI	OK	LO
TOO LIGHT
WEIGHT			UNIT WEIGHT

888.8..88.888.88.8.8.8..

ACAI

2.Press the ON/OFF key again, and the power will be switched OFF.

‰Auto-power off function

It is possible to have the power automatically switched OFF. If zero is displayed for approximately 5 minutes. See “9-2. Functions” and set the F-Function f-04-05 at “1” to enable the function.

ZERO

COUNT

TOTAL 888.8.888.0

M+
	SAMPLE	HI	OK	LO
	TOO LIGHT

		WEIGHT		UNIT WEIGHT
ENTERED	880000.8		80.00000
STABLE
TARE
ZERO
				ACAI

‰The ZERO key will bring the weight display back to zero.

1.Remove everything from the weighing pan and press the ZERO key. Then the weight display shows “-------” and waits for the weighing data to become stable.

2.The scale will zero and the ZERO indicator will come ON to indicate that the scale is ready to start weighing or counting.

‰There is automatic re-zeroing function called “Zero Tracking”. The scale initially comes with this function enabled to take care of normal drifts from zero caused by changes in temperature, humidity, air pressure etc. (F-Function f-04-01).

WEIGHT

STABLE 880000.

TARE

ENTERED

ZERO

9