A&D HC-6Ki, HC-15Ki, HC-3Ki, HC-30Ki manual 0000 Id-00, Id-12, No id, Unit Weight By ID Number, Reset

3-5. Unit Weight By ID Number

1.If there are no unit weights stored into memory, see “5-1. Store unit weight by ID Numbers”.

The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key to clear any unit weight.

2.Press the ID key.

‘id-00’ will be displayed with 00 blinking.

3.Use the 0 Æ 9 10-key pad to display the ID number.

‰If you hit the wrong key, press the

Ckey to clear and start again. (Example of ID number ‘12’ )

4.Press the ENTER key.

The count display will show ‘0’ and the scale will recall ‘12g’ previously entered as the unit weight of ID 12.

COUNT

888.8.8810.

ID.	WEIGHT	UNIT WEIGHT
	0000.	id-00

COUNT

888.8.8810.

		WEIGHT	UNIT WEIGHT
		0000.	id-12
		COUNT
ENTER	888.8.881.0
		WEIGHT	UNIT WEIGHT
		0000.	120000.

If there is no unit weight entered for the ID number you tried to recall, “no id” will be displayed, and you will be returned to step 3.

5.You may now begin counting operations for pieces of the same weight.

COUNT

888.8.8810.

beep, beep, …

WEIGHT	UNIT WEIGHT
0000.	no id

‰“id-00” is a special memory area. It always holds the last unit weight entered.

‰When you register a unit weight, it is automatically placed in the ID “id-00”.

‰If you clear the unit weight by pressing the be recalled by recalling the ID “id-00”.

RESET

key, it can

17