A&D HC-30Ki, HC-15Ki, HC-3Ki, HC-6Ki manual 06-05, 09-01, 09-02, X Key

f-06-05

‰Data Length and Parity

0	7 bits, even parity.
1	7 bits, odd parity.
2	8 bits, non parity.

‰“f-07” and “f-08” are for factory use and should be “0”.

F-09-X

½

key

f-09-01

F-09-01=2 is for USA version only.

‰Operation mode for the ½ key

0	Operating as a key to display and/or change comparator
	upper and lower limits.
1	Operating as	M-	key to subtract Count data from M+
	memory.
2	Operating as a key to toggle the weighing unit between “lb”
	and “g”.

f-09-02

‰Decimal Point and RS-232C Output

0000			Decimal point:		“.”
			Header for stable weight data:				“ST”
			Acknowledgment of command:				<ACK><CR><LF>
	Decimal			Select the	decimal	point	“.”	or	”	,” and output
ACK		Point		format for RS-232C. Set			0	or	1	for each bit.
				Decimal point:		“0” = ”.”
0000				Header:		“1” = ”,”
						“0” = “ST,+001.2346 kg”
						“1” = “WT,+001.2346 kg”
	ST/WT
				Acknowledgment: “0” = ”<ACK><CR><LF>”
N.A.

“1” = ”<ACK>”

‰“f-10”, “f-11” and “f-12” are for factory use and should be “0”.

36