A&D HC-15Ki, HC-3Ki, HC-30Ki, HC-6Ki manual Tare

Page 12

TARE

The TARE key will subtract the displayed container weight.

WEIGHT

1.Remove everything from the weighing pan and press the ZERO key to zero the scale.

2. Place a tare container on the weighing pan. The weight display will show the weight of the container.

3. Press the	TARE	key. Then the
weight display shows “-------”			TARE
and waits for the weighing data to
become stable.

STABLE 880000.

TARE

ENTERED

ZERO

WEIGHT

STABLE 880650.

TARE

ENTERED

ZERO

Container weight

WEIGHT

STABLE 880000.

TARE

ENTERED

ZERO

4.The scale will subtract the weight of the container and the weight display changes to net weight.

The TARE ENTERED indicator will light.

10

Image 12

Contents Counting Scale This manual and Marks Contents AWA Audible Weighing Assist Features IntroductionIntroduction Unpacking Parts OverviewSetting Up Your Scale Best Conditions For WeighingCalibration ON/OFFTotal 880000.880.00000Id-00 Automatic Last Unit Weight Used 888.8.888.00000 Front Panel Overview Turn The Power on and OFF Basic Operations880000.8 Basic OperationsTare TareTo Start Counting Unit Weight By a Sample 888.8.88.10Add Add888.8.88.50 0000 Add0280 Add 888.8.88.20 0000 Add0112 Add 888.8.882.0 0000Key Unit Weight By Keyboard 888.8.88100000 Lo ut Unit Weight By ID Number Reset0000 Id-00 Id-12Entering a Tare Weight Using the Keyboard Tare Key888.8.881.0 0615888.8.-554 888.8-554To Clear Tare EitherStore Unit Weight Store Unit Weight by ID NumbersId-00 Clear Id-00 Clear Id-12Clear idall Clearing All ID Memories at OnceUnit Weight, Tare & Comparator Limits Memorized Key, the tare and/or comparator limitsUsing the M+ Memory Adding Using the M+ KeyM+ Memory Function To Erase the Last M+ AdditionAutomatic M+ Accumulation Mode Viewing the M+ TotalClearing the M+ Total M- Function88888100 8f-00810 8f-05810Comparator Function To Set the Comparator888.8 888.8.-102888.8.-198 Viewing Comparator LimitsCalibration Procedure Using a Weight 888Cal02888Cal10 CalibrationCal 5001 5000Cal f 5000 50009800 Gravity CompensationTo Change or View F-Function Settings Function Parameters00-01 00-0201-01 01-02Acai Operation & Min. Unit Weight 01-0502-01 02-0203-01 03-0204-01 04-0204-05 05-01 05-02 05-04 05-05Comparator 06-01 06-02 06-0306-04 RS-232C Data Output06-05 09-0109-02 09-X Key88888828 88888821Acai Function Acai Automatic OperationAcai Manual Operation Pcs OnWeighing Pan Addition Range Stable AcaiTo Enable/Disable AWA Function Off Mode Setting888.off02 AWA Function888.of100 888.of150Target IntOP-02 Battery Using OP-02 SLA BatteryCharging the Battery 88lo8batInstallation RS-232C SpecificationsOP-03 RS-232C Serial Interface AsciiData Output Mode Data Output Mode f-06-011100 Data to be Sent f-06-02Connecting the AD-8121 Printer / Mode 1 or Mode Print Operations SettingsExample of f-06-02settings Baud Rate f-06-04Connecting the AD-8121 Printer / Mode Command ModeAD-8121 Printout Sample Command List Acknowledgment and Error Codes‰ Weight Data Data Format‰ Unit Weight ‰ Store the specified F-Function setting value Using UFC Universal Flex Coms Function Store Text Data into the Scale MemoryExamples of PF command and AD-8121 Printout Sample Data Format for the Scale DataOP-04 Installation Comparator Relay Output CircuitMaximum rating of the Relay Output Specifications ModelGravity Acceleration MAP Values of gravity at various locationsWorld map Blank