A&D EJ-6100, EJ-440, EJ-3000, EJ-4100, EJ-120, EJ-2000, EJ-1500 manual Introduction, Unpacking

Page 5

1. INTRODUCTION

This manual describes how this balance works and how to get the most out of it in terms of performance.

EJ series balances have the following features:

The EJ series are high-resolution type electronic balances having a display resolution of 1/12,000 ~ 1/60,000.

The balance has a counting function, % function and a comparator function.

The backlight LCD will help with use in a dimly lighted place.

The balance can be operated with an AC adapter, or 4 x “AA” size dry-cell batteries for cordless operation.

The optional RS-232C serial interface can be connected with a printer or personal computer, and Good Laboratory Practice (GLP) data can be obtained.

The optional USB interface is available to connect with a personal computer easily.

2. UNPACKING

When unpacking, check whether all of the following items are included:

Weighing pan

Main unit		Main unit
EJ-120	/ EJ-200 / EJ-300	EJ-1500	/ EJ-2000 / EJ-3000
EJ-410	/ EJ-610	EJ-4100	/ EJ-6100

Instruction Manual

Image 5

Contents 1WMPD4001917 Compliance with FCC rules This manual and MarksContents Maintenance Unpacking IntroductionPart Names and Functions NET indicatorPower source Setting UPSetting up your balance Storage Installing batteriesBreeze break LCD backlight Turn the power on and OFFOperation Conversion table UnitsBasic operation NETSelecting a weighing unit Selecting the counting mode Counting mode pcsCounting mode using the Acai function Storing the sample unit100 Percent mode %100 0 % 1000. %Selecting a comparison mode Setting exampleComparator Func001234 Cp Hi 000000Cp lo 000000 001230Calibration Calibration using a weightCal 060000Glp Cal 50000Gravity acceleration correction Cal 97985Functions Entering the function setting modeCp Hi Key operationEnd Cp Hi Func PoffACai Storing weighing units UnitEnd id Function list Umin Func ACaiSmpl LdinOptions EJ-03 InstallationEJ-02 USB Interface EJ-03 RS-232C serial interfaceEIA RS-232C Interface specificationsData format Data output modeCommand list Command modeEJ-07 / EJ-08 Underhook EJ-07 / EJ-08 InstallationEJ-11 Breeze break EJ-12 Carrying caseDensity specific gravity measurement EJ-13 InstallationEJ-13 Density Determination Kit Example of density measurement 000Change the function table 1751 8801 2000ID Number and GLP Setting the ID numberEnd id func Display character setData format for calibration test report Output exampleData format for calibration report Title Calibration test using a weightEnd Block Title block and End block20000 End 20000Error codes MaintenanceOverload error Range over notice Unit weight error Sample quantity noticeCal e -Cal e Error1Lb0 Hb0 Hb1 Lb1EJ series SpecificationsOther weighing units Options DimensionsValues of gravity at various locations Gravity Acceleration MAPWorld map