Mitel 5320 IP Phone User Guide
To end a Handsfree Answerback call:
∙Press either 
(SPEAKER) or 
(CANCEL).
When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in before the call was established.
Direct Paging - Handsfree Answerback Disabled
Your administrator enables or disables Handsfree Answerback and you can also turn it on or off on your phone. To turn Handsfree Answerback off, see "Direct Paging - Handsfree Answerback Enabled" elsewhere in this guide. When Handsfree Answerback is disabled on your phone and you receive a Direct Page, the Direct Page is indicated by a single burst of tone.
To answer Direct Page calls when Handsfree Answerback is disabled:
| Phone state before Page |
| To answer the Direct Page |
| arrives: |
| (indicated by single burst of tone): |
|
|
|
|
| Phone is idle and MUTE is OFF. | 1. | Check that MUTE is ON solid. |
|
| ||
|
| 2. | Lift the handset OR press the MUTE key to answer in |
|
|
| Handsfree mode. (The light turns OFF.) |
|
| 3. | Begin speaking. |
| You are on a handset call or | 1. | Check that MUTE is flashing. |
| headset call, and MUTE is OFF | ||
| 2. | Press MUTE. The light turns ON solid and you are now | |
|
| ||
|
|
| speaking to the paging party and have MUTED your |
|
|
| handset/headset call. |
|
| 3. | Speak to the paging party. Press MUTE to alternate |
|
|
| between handset and handsfree calls. |
| You are on a MUTED handset/headset | The party paging you receives a busy tone. Handsfree | |
| call, OR, you are on a Handsfree call | Answerback does not interrupt your call. | |
|
|
|
|
To end a Direct Page call, do one of the following:
∙Hang up the handset to end a handset call.
∙Press 
(SPEAKER) to end a Handsfree call.
∙Press 
(CANCEL).
When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in before the call was established.
- 37 -