Mitel 5320 IP Phone User Guide
3.Press the Read Message softkey, and do one or all of the following:
∙To display the time the message was sent, press the More Msg softkey.
∙To display the number of the caller, press the More Msg softkey twice.
∙To call the message sender, press the Call softkey.
∙To delete the message, press the Erase Msg softkey.
∙To view the next message, press (MESSAGE).
You can check for messages from a remote station:
1.Press Superkey (must be programmed to a key).
2.Press the No softkey until "Remote Msging?" appears.
3.Press the Yes softkey.
4.Dial your directory number.
5.Press the Enter softkey.
6.If a password is required, enter your password and press the Enter softkey.
7.Press the Yes softkey.
You can set, change, or clear a password (up to 7 digits, not including 0):
1.Press Superkey (must be programmed to a key).
2.Press the No softkey until "Set Password?" appears.
3.Press the Yes softkey.
4.Do one of the following:
∙To enter a new password, enter your password.
∙To change or clear your password, enter your current password.
5.Press the Enter softkey.
6.To change or clear your password, do one of the following:
∙To change your password, enter your new password and press the Enter softkey.
∙To clear your password, enter 0.
7.Enter your new password again.
8.If you are setting up or changing a password, press the Enter softkey.
9.Press Superkey (must be programmed to a key).
- 46 -