TROUBLESHOOTING GUIDE
➤Phone Will Not Operate
Disconnect any other equipment that may be attached to the phone. Check your phone cords and connections. Try a different line cord and/or handset cord to determine if the problem is with one of the cords. If problem lies in the cord simply replace the defective cord.
Try plugging the phone into a different phone jack.
the handset before dialing the number. Wait for the sound level indicator to light solid before dialing.
➤Programming Problems
¥CanÕt Store Numbers Into Memory
Your new Clarity phone must charge for two (2) hours before you can program any numbers into it.
➤Dialing Problems
¥ CanÕt Dial Out
Make sure that TONE/PULSE switch is set correctly. Phone should be set to TONE if you have touch tone service from your phone company. Phone should be
set to PULSE if operating with rotary dial service.
¥Loss Of Numbers Programmed Into Memory
Your Clarity phone will maintain its memory for up to 12 hours during a power loss. If you unplug the phone from the telephone line for long periods or lose your phone service for an extended period of time you will need to reprogram the phone.
¥Phone DoesnÕt Dial Out On First Attempt
Your phone may be at the end of a long line of phones, due to the way the phone company installed the wiring in your neighborhood. In this case, your phone may not get enough power from the phone line. Try waiting
➤Programming Personal Access Codes
¥Difficulty Programming Account Numbers
Your TONE/PULSE selector must be switched to the TONE mode to enter account numbers. This is because most
20 | CLARITY W1000 |