TROUBLESHOOTING GUIDE
You may not be speaking directly into the transmitter. Always speak directly into the mouthpiece in your normal tone
of voice.
➤Compatibility
¥Clarity Phones Are Compatible With Digital PBX Systems
If a standard, single line phone works, your clarity phone should also work.
¥Clarity Phones Are Not Compatible With Key Systems Or AT&T PBX Systems
These units have a large electronic box controlling many phones as one unit. These types of units may be found in office buildings and some retirement homes, nursing homes and condos.
➤Ringer Volume Problem
¥Unable To Hear Phone Ringer
Make sure the ringer volume is not set to OFF.
Slide the volume adjustment switch to the large dot and the pitch adjustment switch to the small dot. This will cause the ringer to sound at its loudest and lowest
frequency. Typically, low frequencies are easier for people with hearing loss to detect.
Consider purchasing a variable pitch auxiliary ringer such as the Clarity WR-
100.These devices are exceptionally loud and can be plugged into any phone outlet in your home.
➤Interference Problems
¥User Hears Radio Or CB Transmissions Over The Phone
Contact your local phone company to have your telephone line checked. A Radio Frequency Interference (RFI) filter may be put on the line to minimize this problem.
If you have any telephone service prob- lems, first make sure you have followed all of the installation procedures outlined in this userÕs guide. Then try to determine if the source of the problem is the Clarity phone itself or your phone service. To do this, disconnect the Clarity W1000 and plug in your standard telephone. If the trouble persists with the standard tele- phone, inform your telephone company.
If the trouble is related to only the Clarity phone, review the installation procedures and the troubleshooting guide before referring to the Limited Warranty stated later in this user guide.
22 | CLARITY W1000 |