Multi-Tech Systems MVP103, 410 manual Configuration

Page 21

Chapter 2 - Configuration

7c. To add an entry for MultiVOIP FXO ports, configure Endpoint Type, Product ID, Names, Registration IP, and Call Signalling Port fields as indicated below. Configure the Names field with a unique descriptive identifier for the FXO trunk. This same name will be used later to map Outbound Phone Book entries with specific digit patterns (area codes, etc.) to this FXO trunk, and for Caller ID purposes in survivable mode. The Registration IP should match the IP address of the MultiVOIP where the port is located. This could be the IP address of this very same MultiVOIP or another MultiVOIP. Leave the other fields blank. Only one entry is required for one or more ports on a given MultiVOIP. For example, if the MultiVOIP has four FXO ports, only one gatekeeper entry should be added. Click OK to accept this entry.

7d. To add an entry for MultiVOIP DID ports, configure Endpoint Type, Product ID, Names, Registration IP, and Call Signalling Port fields as indicated below. Configure the Names field with a unique descriptive identifier for the DID trunk. This name will be used for Caller ID purposes in survivable mode. The Registration IP should match the IP address of the MultiVOIP where the DID port is located. This could be the IP address of this very same MultiVOIP or another MultiVOIP. Leave the other fields blank. Only one entry is required for one or more ports on a given MultiVOIP. For example, if the MultiVOIP has four DID ports, only one gatekeeper entry should be added. Click OK to accept this entry.

Multi-Tech Systems, Inc. Avaya Communication Manager Guide

21

Image 21

Contents MultiVOIP Revision Date Description Configuration GuideContents Introduction IntroductionMultiVOIP in Avaya Communication Manager System Configuration ConfigurationChannel RTP Port Rtcp Port T38 Port Configuration Configuration Bandwidth per Channel Voice Frames per IP Packet Communication Manager MultiVOIP FXS Channels Configuration Configuration Communication Manager MultiVOIP FXO Channels Configuration = Isdn Communication Manager MultiVOIP did Channels Configuration = Isdn Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Regional Parameter Definitions Field Name Values Description Regional Parameters screenField Name Values Description Regional Parameter DefinitionsTone Pair Values Related MultiVOIP Setup Parameters Communication Manager SettingsRelated MultiVOIP Setup Parameters Version 4 Parameters Voice/Fax Parameters Channel to be configured is selected here Fax Volume Fax EnableJitter Value Default = Mode Fax FRF 11 T.38Advanced Features Jitter Automatic Auto DisconnectInterface Parameters Related MultiVOIP Setup Parameters FXS Not applicable to FXS interface Dialing Options FXO Interface Parameter DefinitionsFXO Disconnect On cont’d CID Number Voip Caller ID Case #4 Remote FXS call on H.323 voip system Did Options GK General Settings Definitions GK General SettingsActivity Configuration PolicyRAS Parameters GK General Settings Definitions cont’dGatekeeper Endpoints Command Buttons Current Calls Field Definitions Gatekeeper CallsNumber. a sequential number for identification in the list ID alias of the endpoint originating the callConference ID number CID is a unique non-zero value created Call Details Field DefinitionsConference will have the same CID ID identifies the call with which the message is associatedType of conference request create, invite or join Total amount of bandwidth used by the callLast reported state of the call Reason associated with the last state of the callE164 alias phone number used to make the call H.323 alias name used to make the callAn e-mail address used to make the call Address and port numberNetwork Parameter Definitions Gatekeeper Network ParametersField Name Values Description Status Information OptionsLine Hunting Information ARQCall Mode GK-ID Services Screen Definitions Gatekeeper ServicesField Name Values Description GK Defined Services PublicDynamic Miscellaneous MiscellaneousComm Mgr Dialing Example #1 a local station-to-station call Remote Configuration Miscellaneous MVP130-AV Rev a MVP130-AV RevMVP130-AV-FXS Rev a MVP210-AV Rev aMiscellaneous Link Management Feature Issues Index IndexCoder field FRF11 Gatekeeper Response to field GK General Settings, RAS DID-DPO FXO Trunk Group form fields to set Dtmf Gain Unregister endpoints command Dtmf Gain High Tones