Multi-Tech Systems 410, MVP103 manual Regional Parameters screen

Page 30

Chapter 2 – Configuration

Regional Parameters screen

The main distinguishing feature of the Regional Parameters screen for Avaya Communication Manager MultiVOIPs is the addition of the survivability dial tone.

1.Set the Survivability Tone in the ConfigurationRegional Parameters screen.

2.The Regional Parameters screen will appear. For the country selected, the standard set of frequency pairs will be listed for dial tone, busy tone, ‘unobtainable’ tone (fast busy or trunk busy), and ring tone.

3.In each field, enter the values that fit your particular system. For most applications, it should be sufficient to select the appropriate country/region and leave the settings at their default values.

The Regional Parameters fields are described in the table below.

“Regional Parameter” Definitions

Field Name	Values	Description
Country/	Australia, Central America,	Name of a country or region that uses a certain set of tone pairs
Region	Chile, Europe, France,	for dial tone, ring tone, busy tone, and ‘unobtainable’ tone (fast
	USA, Japan, UK, Custom	busy tone), survivability tone (tone heard briefly, 2 seconds,
	Note:	after going offhook denoting survivable mode of VOIP unit)
	“Survivability” tone	and re-order tone (a tone pattern indicating the need for the
	indicates a special type of	user to hang up the phone). In some cases, the tone-pair scheme
	call-routing redundancy &	denoted by a country name may also be used outside of that
	applies to Comm Mgr	country. The “Custom” option (button) assures that any tone-
	VOIP units only.	pairing scheme worldwide can be accommodated.
Type column	dial tone, ring tone,	Type of telephony tone-pair for which frequency, gain, and
	busy tone, unobtainable	cadence are being presented.
	tone (fast busy),
	survivability tone,
	re-order tone
Frequency 1	freq. in Hertz	Lower frequency of pair.
Frequency 2	freq. in Hertz	Higher frequency of pair.
Gain 1	gain in dB	Amplification factor of lower frequency of pair.
	+3dB to –31dB	This applies to the dial, ring, busy and ‘unobtainable’ tones that
	and “mute” setting	the MultiVOIP outputs as audio to the FXS, FXS, or E&M port.
		Default: -16dB

30	Multi-Tech Systems, Inc. Avaya Communication Manager Guide

Image 30

Contents MultiVOIP Configuration Guide Revision Date DescriptionContents Introduction IntroductionMultiVOIP in Avaya Communication Manager System Configuration ConfigurationChannel RTP Port Rtcp Port T38 Port Configuration Configuration Bandwidth per Channel Voice Frames per IP Packet Communication Manager MultiVOIP FXS Channels Configuration Configuration Communication Manager MultiVOIP FXO Channels Configuration = Isdn Communication Manager MultiVOIP did Channels Configuration = Isdn Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Regional Parameters screen Regional Parameter Definitions Field Name Values DescriptionRegional Parameter Definitions Field Name Values DescriptionTone Pair Values Communication Manager Settings Related MultiVOIP Setup ParametersRelated MultiVOIP Setup Parameters Version 4 Parameters Voice/Fax Parameters Channel to be configured is selected here Jitter Value Default = Fax EnableFax Volume Mode Fax FRF 11 T.38Advanced Features Jitter Auto Disconnect AutomaticInterface Parameters Related MultiVOIP Setup Parameters FXS Not applicable to FXS interface FXO Interface Parameter Definitions Dialing OptionsFXO Disconnect On cont’d CID Number Voip Caller ID Case #4 Remote FXS call on H.323 voip system Did Options Activity Configuration GK General SettingsGK General Settings Definitions PolicyGK General Settings Definitions cont’d RAS ParametersGatekeeper Endpoints Command Buttons Number. a sequential number for identification in the list Gatekeeper CallsCurrent Calls Field Definitions ID alias of the endpoint originating the callConference will have the same CID Call Details Field DefinitionsConference ID number CID is a unique non-zero value created ID identifies the call with which the message is associatedLast reported state of the call Total amount of bandwidth used by the callType of conference request create, invite or join Reason associated with the last state of the callAn e-mail address used to make the call H.323 alias name used to make the callE164 alias phone number used to make the call Address and port numberField Name Values Description Status Information Gatekeeper Network ParametersNetwork Parameter Definitions OptionsARQ Line Hunting InformationCall Mode GK-ID Field Name Values Description GK Defined Services Gatekeeper ServicesServices Screen Definitions PublicDynamic Miscellaneous MiscellaneousComm Mgr Dialing Example #1 a local station-to-station call Remote Configuration Miscellaneous MVP130-AV-FXS Rev a MVP130-AV RevMVP130-AV Rev a MVP210-AV Rev aMiscellaneous Link Management Feature Issues Index IndexCoder field FRF11 Gatekeeper Response to field GK General Settings, RAS DID-DPO FXO Trunk Group form fields to set Dtmf Gain Unregister endpoints command Dtmf Gain High Tones