Multi-Tech Systems 410, MVP103 manual GK General Settings Definitions cont’d, RAS Parameters

Chapter 3 – Related MultiVOIP Setup Parameters

Click on the Memory Setting button to access the Memory screen. The configurable fields must be configured as shown below.

		GK General Settings Definitions (cont’d)
Field Name	Values	Description
GK Memory	Values
Maximum	10, 20, 30	The maximum number of concurrent calls. MVP210AV support 5
Calls		calls; MVP410 AV supports 10 calls; MVP810 AV supports 15 calls.
Maximum	2 - 250	Maximum number of endpoints that can be registered on the
Registrations		gatekeeper-controlled network.
		Note: IP phones registrations are limited to 15 regardless of this
		setting.
RAS Parameters		In H.323, RAS parameters pertain to Registration, Admission, and
		Status in the H.225 Call Signaling Protocol.
Response		The timeout (in seconds) before re-transmission of a RAS message that
TO		had previously fetched no response.
RAS Port		The RAS port for gatekeeper communication with endpoints.
		Default value = 1719
Q.931 Parameters		In H.323, Q.931 parameters are those that pertain to the set-up and
		tear- down of connections between H.323 endpoints.
Response		The timeout (in seconds) waiting for the TCP reply.
TO (sec)
Connect TO		The timeout (in seconds) waiting for the Connect message of a call.
(sec)
Q.931		Logical port through which Q.931 protocol messages are handled.
Signaling		Default value = 1730
Port
Buttons
Default		Invokes default values for all parameters on the GK General Settings
		screen.

52 Multi-Tech Systems, Inc. Avaya Communication Manager Guide