Multi-Tech Systems 410, MVP103 manual Description, Dynamic

Page 64

			Chapter 3 – Related MultiVOIP Setup Parameters

			Services Screen Definitions (cont’d)
	Field Name	Values	Description
	V2 GW Prefixes		H.323 Version 2 enables the gateway to specify prefixes that the user should
			dial before the WAN number in order to make a call using a certain medium.
			E.g., the user could dial the prefix 3 for voice calls or 77 for H.320 video calls.
			The prefixes are defined in the RRQ message at registration. Prefix can be any
			H.323 alias, including an H.323 ID & mail address.
			When a terminal places a LAN to WAN call, it should add one of the prefixes to
			the dialed number. The Gatekeeper identifies the prefix & routes the call to the
			appropriate gateway. If more than one gateway supplies the same prefix, line
			hunting is possible between the gateways.

	Prefix		Identifies the service. The prefix can be a numeric code, alphanumeric string,
			name, or phone number that the user dials. Per H.323 Vers. 2, prefixes can also
			be of URL and e-mail type. Also for H.323 Vers. 2, the type must precede the
			prefix. For example, TEL: 3 or NAME: John.
	Description		A description of the service that is accessible by dialing the prefix.
	Default		Select to make the service accessible to all endpoints that are not predefined in
			the zone.
	Public		Select to make the service accessible to all endpoints that are not part of the
			zone.
	Dynamic	Y/N	Indicates whether the service is static (essentially permanent) or timed &
			conditional (dynamic). This field indicates whether the service has been added
			manually (non-dynamically; field value =N) or dynamically (field value = Y) as
			part of registration from endpoints.
	Buttons		These buttons allow you add, edit, or delete a selected service or prefix.

64	Multi-Tech Systems, Inc. Avaya Communication Manager Guide

Image 64

Contents MultiVOIP Configuration Guide Revision Date DescriptionContents Introduction IntroductionMultiVOIP in Avaya Communication Manager System Configuration ConfigurationChannel RTP Port Rtcp Port T38 Port Configuration Configuration Bandwidth per Channel Voice Frames per IP Packet Communication Manager MultiVOIP FXS Channels Configuration Configuration Communication Manager MultiVOIP FXO Channels Configuration = Isdn Communication Manager MultiVOIP did Channels Configuration = Isdn Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Regional Parameters screen Regional Parameter Definitions Field Name Values DescriptionRegional Parameter Definitions Field Name Values DescriptionTone Pair Values Communication Manager Settings Related MultiVOIP Setup ParametersRelated MultiVOIP Setup Parameters Version 4 Parameters Voice/Fax Parameters Channel to be configured is selected here Fax Enable Fax VolumeJitter Value Default = Mode Fax FRF 11 T.38Advanced Features Jitter Auto Disconnect AutomaticInterface Parameters Related MultiVOIP Setup Parameters FXS Not applicable to FXS interface FXO Interface Parameter Definitions Dialing OptionsFXO Disconnect On cont’d CID Number Voip Caller ID Case #4 Remote FXS call on H.323 voip system Did Options GK General Settings GK General Settings DefinitionsActivity Configuration PolicyGK General Settings Definitions cont’d RAS ParametersGatekeeper Endpoints Command Buttons Gatekeeper Calls Current Calls Field DefinitionsNumber. a sequential number for identification in the list ID alias of the endpoint originating the callCall Details Field Definitions Conference ID number CID is a unique non-zero value createdConference will have the same CID ID identifies the call with which the message is associatedTotal amount of bandwidth used by the call Type of conference request create, invite or joinLast reported state of the call Reason associated with the last state of the callH.323 alias name used to make the call E164 alias phone number used to make the callAn e-mail address used to make the call Address and port numberGatekeeper Network Parameters Network Parameter DefinitionsField Name Values Description Status Information OptionsARQ Line Hunting InformationCall Mode GK-ID Gatekeeper Services Services Screen DefinitionsField Name Values Description GK Defined Services PublicDynamic Miscellaneous MiscellaneousComm Mgr Dialing Example #1 a local station-to-station call Remote Configuration Miscellaneous MVP130-AV Rev MVP130-AV Rev aMVP130-AV-FXS Rev a MVP210-AV Rev aMiscellaneous Link Management Feature Issues Index IndexCoder field FRF11 Gatekeeper Response to field GK General Settings, RAS DID-DPO FXO Trunk Group form fields to set Dtmf Gain Unregister endpoints command Dtmf Gain High Tones