Multi-Tech Systems 410, MVP103 manual Command Buttons

		Chapter 3 – Related MultiVOIP Setup Parameters
		Existing Endpoints Parameter Definitions
Field Name	Values	Description
Type	Gatekeeper,	The endpoint type . When an endpoint attempts to register with the
	Gateway,	Gatekeeper, the Gatekeeper compares the endpoint type with the predefined
	MCU,	value. If the Gatekeeper detects a discrepancy, the registration is not
	Terminal,	accepted. If you are not sure of the endpoint type, select Undefined, which
	or	allows any endpoint of any type to register with the Gatekeeper.
	Undefined.	(Multipoint Control Units, MCUs, are used to facilitate conference calls.)
Online	+	When “+” appears, the endpoint’s registration is dynamic or “online.”
	or
	[blank]
PreDef	+	When “+” appears, the endpoint’s registration is static or “predefined.”
	or
	[blank]
Registration	n.n.n.n	The RAS address and RAS port of the endpoint.
IP	0-255
Name		The H.323 ID alias of the endpoint.
Phone		The e164 alias number (conventional PSTN phone number)of the endpoint.
Other		Additional aliases for the endpoint: URL, e-mail address, transport address,
Aliases		party.address, or private network number (per ISO/IEC 11571).
		Alias addresses must be unique within a zone. Gatekeepers themselves cannot
		have aliases.
Msg	LRQ,	The type of message sent by the endpoint when the mode for processing
	RRQ,	registration is manual. This can be an LRQ, RRQ, URQ, or AppURQ (which is
	URQ, or	a URQ sent by the Gatekeeper).).).
	AppURQ
TTL	seconds	The time remaining in seconds before the TimeToLive timer expires. If the
		endpoint fails to reregister within this time, the endpoint is unregistered.
Command	Buttons
Add	--	Opens an empty Predefined Properties dialog box where you can
		predefine a new registration.
Unregister	--	Sends a URQ message to the selected endpoint, deleting the online (or
		dynamic) registration properties and unregistering the endpoint.
Unregister	--	Sends a URQ to all the online endpoints in order to unregister them.
All
Disconnect	--	Disconnects all calls with which the endpoint is involved.
Endpoint
Delete	--	Deletes the endpoint from the Gatekeeper database. A URQ will not be
		sent to the endpoint.
Del Pre-def	--	Deletes the predefined (static) properties of the endpoint.
Online	--	Opens the Online properties screen or the selected endpoint whereupon
Properties		are shown details of that endpoint’s configuration.

54 Multi-Tech Systems, Inc. Avaya Communication Manager Guide