Multi-Tech Systems MVP103, 410 manual Advanced Features

Page 39

Chapter 3 – Related MultiVOIP Setup Parameters

Voice/Fax Parameter Definitions Continued

Field Name	Values	Description
Coder	Parameters (cont’d)

Selected	G.711 a/u law 64 kbps;	Select from a range of coders with specific bandwidths.
Coder	G.726, @ 16/24/32/40	The higher the bps rate, the more bandwidth is used.
	kbps;	The channel that you are calling must have the same
	G.727, @ nine bps rates;	voice coder selected.
	G.723.1 @ 5.3 kbps,	Default = G.723.1 @ 6.3 kbps, as required for H.323.
	6.3 kbps;	Here 64K of digital voice are compressed to 6.3K,
	G.729, 8kbps;	allowing several simultaneous conversations over the
	Net Coder @ 6.4, 7.2, 8,	same bandwidth that would otherwise carry only one.
	8.8, 9.6 kbps	To make selections from the Selected Coder drop-down
	G.711/G.729	list, the Manual option must be enabled.
	G.729/G.711
Max	11 – 128 kbps	This drop-down list enables you to select the maximum
bandwidth		bandwidth allowed for this channel. The Max
(coder)		Bandwidth drop-down list is enabled only if the Coder
		is set to Automatic.
		If coder is to be selected automatically (“Auto” setting),
		then enter a value for maximum bandwidth.
Advanced Features

Silence	Y/N	Determines whether silence compression is enabled (checked)
Compression		for this voice channel.
		With Silence Compression enabled, the MultiVOIP will not
		transmit voice packets when silence is detected, thereby
		reducing the amount of network bandwidth that is being used
		by the voice channel.
		Default = off.

Echo	Y/N	Determines whether echo cancellation is enabled (checked) for
Cancellation		this voice channel.
		Echo Cancellation removes echo and improves sound quality.
		Default = on.

Forward	Y/N	Determines whether forward error correction is enabled
Error		(checked) for this voice channel.
Correction		Forward Error Correction enables some of the voice packets
		that were corrupted or lost to be recovered. FEC adds an
		additional 50% overhead to the total network bandwidth
		consumed by the voice channel.	Default = Off

Multi-Tech Systems, Inc. Avaya Communication Manager Guide

39

Image 39

Contents MultiVOIP Revision Date Description Configuration GuideContents Introduction IntroductionMultiVOIP in Avaya Communication Manager System Configuration ConfigurationChannel RTP Port Rtcp Port T38 Port Configuration Configuration Bandwidth per Channel Voice Frames per IP Packet Communication Manager MultiVOIP FXS Channels Configuration Configuration Communication Manager MultiVOIP FXO Channels Configuration = Isdn Communication Manager MultiVOIP did Channels Configuration = Isdn Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Configuration Regional Parameter Definitions Field Name Values Description Regional Parameters screenField Name Values Description Regional Parameter DefinitionsTone Pair Values Related MultiVOIP Setup Parameters Communication Manager SettingsRelated MultiVOIP Setup Parameters Version 4 Parameters Voice/Fax Parameters Channel to be configured is selected here Mode Fax FRF 11 T.38 Fax EnableFax Volume Jitter Value Default =Advanced Features Jitter Automatic Auto DisconnectInterface Parameters Related MultiVOIP Setup Parameters FXS Not applicable to FXS interface Dialing Options FXO Interface Parameter DefinitionsFXO Disconnect On cont’d CID Number Voip Caller ID Case #4 Remote FXS call on H.323 voip system Did Options Policy GK General SettingsGK General Settings Definitions Activity ConfigurationRAS Parameters GK General Settings Definitions cont’dGatekeeper Endpoints Command Buttons ID alias of the endpoint originating the call Gatekeeper CallsCurrent Calls Field Definitions Number. a sequential number for identification in the listID identifies the call with which the message is associated Call Details Field DefinitionsConference ID number CID is a unique non-zero value created Conference will have the same CIDReason associated with the last state of the call Total amount of bandwidth used by the callType of conference request create, invite or join Last reported state of the callAddress and port number H.323 alias name used to make the callE164 alias phone number used to make the call An e-mail address used to make the callOptions Gatekeeper Network ParametersNetwork Parameter Definitions Field Name Values Description Status InformationLine Hunting Information ARQCall Mode GK-ID Public Gatekeeper ServicesServices Screen Definitions Field Name Values Description GK Defined ServicesDynamic Miscellaneous MiscellaneousComm Mgr Dialing Example #1 a local station-to-station call Remote Configuration Miscellaneous MVP210-AV Rev a MVP130-AV RevMVP130-AV Rev a MVP130-AV-FXS Rev aMiscellaneous Link Management Feature Issues Index IndexCoder field FRF11 Gatekeeper Response to field GK General Settings, RAS DID-DPO FXO Trunk Group form fields to set Dtmf Gain Unregister endpoints command Dtmf Gain High Tones